Wamkelekile kwiiwebhusayithi zethu!
English
1
Ibhena (1)
Ibhena (3)
Ibhena (2)
Permalloy E11c Ni79Mo4 79HM Soft Magnetic Alloy ngocingo oFanekiweyo
  • Permalloy E11c Ni79Mo4 79HM Soft Magnetic alloy ngocingo
  • Permalloy E11c Ni79Mo4 79HM Soft Magnetic alloy ngocingo
  • Permalloy E11c Ni79Mo4 79HM Soft Magnetic alloy ngocingo
  • Permalloy E11c Ni79Mo4 79HM Soft Magnetic alloy ngocingo

Permalloy E11c Ni79Mo4 79HM Soft Magnetic alloy ngocingo

Inkcazelo emfutshane:


I-Permalloy 80 yi-alloy ye-nickel, isinyithi kunye ne-molybdenum. Yingxubevange enemagnethi ethambileyo ekwaziyo ukungena ngamandla. I-alloy ine-coercivity ephantsi, kufuphi ne-zero magnetostriction, kunye ne-anisotropic magnetoresistance ebalulekileyo. I-magnetostriction ephantsi ibalulekile kwizicelo zamashishini,

apho uxinezeleko oluguquguqukayo kwiifilim ezibhityileyo lunokuthi ngenye indlela lubangele umahluko omkhulu owonakalisayo kwiipropathi zemagneti.


  • INOMBOLO yoMfanekiso.Permalloy
  • Ukuxhathisa:0.55
  • Ubude (≥ %):15-25
  • Ibakala:E11C
  • Ni :78.5-80.0%
  • Uphawu:Ukufikeleleka okuphezulu kokuqala
  • Imvelaphi:eTshayina

    • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    Ipharamitha

    ULUHLU 1 olufunekayo kwiMichiza

    Element C≤ P≤ S≤ Mnu Si Cu≤ Mo Ni Fe
    Ukuqamba% 0.03 0.02 0.02 0.6-1.1 0.3-0.5 0.20 3.8-4.1 78.5-80.0 Intsalela

    Amanqaku:

    Ubume kunye nemilinganiselo ye-alloys ihambelana ne-GBn198-88

    ULUHLU 2 Iimfuno zoMzimba

    Ipropati Ukunganyangeki (μΩM) Ubunzima (g/cm3) Curie Point.C Ukugcwala okuphezulu kwemagneto-striction coefientλθ/10-6
    Ixabiso 0.55 8.6 450 2

    ULUHLU 3 lweePropati zeMagnetic ze-AC ze-Strip(min Ixabiso)

    Ukutyeba Incopho yamandla omhlaba wemagnethi yi-0.1A/m, Phantsi kweefrikhwensi ezahlukeneyo zokufikeleleka kwemagnethi μm/(mH/m)
    60Hz 400Hz 1KHz 10KHz
    0.02 17.5 12.5
    0.05 18.8 9.4
    0.10 22.5 15
    0.20 12.5 7.5
    0.35 25 8.8

    ULUHLU 4 I-Coefficient of Linear Expansion at different Temperature/(x10-6)

    Temp 20-100°C 20-200ºC 20-300ºC 20-400ºC 20-500ºC 20-600ºC 20-700ºC
    Ixabiso 1.3-10.8 10.9-11.2 14.4-12.9 11.9-12.5 12.3-13.2 12.7-13.4 13.1-13.6

    ULUHLU 5 lweMfuneko yeMagnetic (Intambo eqengqelekayo ebandayo)

    IBanga I

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    0.005 12.5 44.0 0.75 6.4
    0.01 17.5 87.5 0.75 4.8
    0.02-0.04 20.0 112.5 0.75 4.0
    0.05-0.09 22.5 137.5 0.75 2.8
    0.10-0.19 25.0 162.5 0.75 2.0
    0.20-0.34 28.0 225.0 0.75 1.6
    0.35-1.00 30.0 250.0 0.75 1.2
    1.10-2.50 27.5 225.0 0.75 1.6
    2.50-3.00 26.3 187.5 0.75 2.0

    IBakala II

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    0.02-0.04 22.5 125.0 0.75 2.4
    0.05-0.09 25.0 150.0 0.75 2.0
    0.10-0.19 27.5 187.5 0.75 1.6
    0.20-0.34 31.3 250.0 0.75 1.2
    0.35 32.5 275.0 0.75 0.79

    IBakala III

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    0.01 25.0 150.0 0.73 2.4
    0.02-0.04 31.0 190.0 0.73 1.6
    0.05-0.09 38.0 250.0 0.73 1.2
    0.10-0.19 38.0 250.0 0.73 1.2
    0.20-0.34 38.0 280.0 0.73 1.0
    0.35 44.0 310.0 0.73 1.0

    I-Hot Rolling(i-forging) i-Flastspring

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    3-22 25.0 125 0.75 2.4

    Hot Rolling (Forging)Bar

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    8-100 25.0 125.0 0.75 2.4
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iindidi zeemveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala