China Aws A5.14 Nickel Alloy Ernicu-7 MIG Welding Wire TIG Welding Rod for Monel 400 Welding Manufacture and Factory |TANKII

Aws A5.14 Nickel Alloy Ernicu-7 MIG Welding Wire TIG Welding Rod for Monel 400 Welding

Inkcazelo emfutshane:

I-ERNiCu-7 inamandla amahle kwaye ixhathisa ukubola kumajelo amaninzi, kuquka amanzi olwandle, i-salts, kunye nokunciphisa i-acids.Kwaye ingasetyenziselwa ukoleka phezu kwentsimbi ye-carbon, ngaphandle kokuba i-buffer layer ye-ERNi-1 isetyenziselwa umaleko wokuqala.Le ngxubevange ayinzima iminyaka kwaye xa isetyenziselwa ukujoyina i-Monel K-500 inamandla angaphantsi kunesiseko sesinyithi.

INOMBOLO yoMfanekiso.I-ERNiCu-7

Umphezulu:Eqaqambileyo

Ipakethe yezoThutho:Spool+Case

Imvelaphi:Shanghai China

Ububanzi:0.8-4.0mm

Isakhono seMveliso:IiToni ezingama-2000/Ngonyaka

Uphawu lwentengiso:TANKII

Ikhowudi yeHS:75052200

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

1. FM60 Oxford Alloy 60I-ERNiCu-7TIG intonga welding

I-ERNiCu-7unamandla kwaye uyaxhathisa ukubola kumajelo amaninzi, kuquka amanzi olwandle, iityuwa, kunye neeasidi zokunciphisa.Kwaye ingasetyenziselwa ukoleka phezu kwentsimbi ye-carbon, ngaphandle kokuba i-buffer layer ye-ERNi-1 isetyenziselwa umaleko wokuqala.Le ngxubevange ayinzima iminyaka kwaye xa isetyenziselwa ukujoyina i-Monel K-500 inamandla angaphantsi kunesiseko sesinyithi.

Amagama aqhelekileyo: Oxford Alloy® 60 FM 60 Techalloy 418
Umgangatho: AWS 5.14 Udidi lwe-ERNiCu-7 / ASME SFA 5.14 Udidi lwe-ERNiCu-7 ASME II, SFA-5.14 UNS N04060 Werkstoff Nr.2.4377 ISO SNi4060 Europe NiCu30Mn3Ti

UHLELO LWEKHEMIKALI(%)

C	Si	Mn	S	P	Ni
≤0.15	≤1.25	≤4.0	≤0.015	≤0.02	62-69
Al	Ti	Fe	Cu	abanye
≤1.25	1.5-3.0	≤2.5	Phumla	<0.5

I-WELDING PARAMETERS

Inkqubo	Ububanzi	I-Voltage	Amperage	Irhasi
TIG	.035″ (0.9mm) .045″ (1.2mm) 1/16″ (1.6mm) 3/32″ (2.4mm) 1/8″ (3.2mm)	12-15 13-16 14-18 15-20 15-20	60-90 80-110 90-130 120-175 150-220	100% Argon 100% Argon 100% Argon 100% Argon 100% Argon
MIG	.035″ (0.9mm) .045″ (1.2mm) 1/16″ (1.6mm)	26-29 28-32 29-33	150-190 180-220 200-250	75% Argon + 25% Helium 75% Argon + 25% Helium 75% Argon + 25% Helium
WABONA	3/32″ (2.4mm) 1/8″ (3.2mm) 5/32″ (4.0mm)	28-30 29-32 30-33	275-350 350-450 400-550	I-Flux efanelekileyo ingasetyenziswa I-Flux efanelekileyo ingasetyenziswa I-Flux efanelekileyo ingasetyenziswa

IIPROPATI ZOOMATSHINI

Tensile strength	76,5000 PSI	530 MPA
Unikeze Amandla	52,500 PSI	360 MPA
Elongation	34%

IZICELO
I-ERNiCu-7 ingasetyenziselwa ukusetyenziswa kwe-welding engafaniyo usebenzisa i-alloys ezahlukeneyo ze-nickel-copper kwi-nickel 200 kunye ne-copper-nickel alloys.
I-ERNiCu-7 isetyenziselwa i-gas-tungsten-arc, i-gas-metal-arc, kunye ne-submerged-arc welding ye-Monel alloy 400 kunye ne-K-500.
I-ERNiCu-7 isetyenziswe ngokubanzi kwizicelo zaselwandle ngenxa yokuchasana kakuhle nemiphumo ephazamisayo yamanzi olwandle kunye namanzi amdaka.

Ngaphambili: Zonke iintlobo zeNickel Alloy Welding Wire Erni-1 Ernicrmo-3 Ernicrmo-4 Ernicr-3 Ernicu-7 Ernicrmo-14 Ernicrmo-7 Ernicrmo-10

Okulandelayo: I-Tankii High ephothiweyo ngocingo lombane iThermocouple Wire Type K yeCeramic Tube

Bhala umyalezo wakho apha kwaye uwuthumele kuthi