Ukuveliswa kwe-China Enameled Ni80Cr20 nichrome 80/20 NiCr Resistance Alloy Wire kunye neFektri

I-Enameled Ni80Cr20 nichrome 80/20 NiCr Resistance Alloy Wire

Inkcazo emfutshane:

Ingcaciso yeMveliso
Ezi ntambo zokumelana ezine-enamel zisetyenziswa ngokubanzi kwii-resistor ezisemgangathweni, iimoto
iinxalenye, ii-resistors ezijikelezayo, njl. kusetyenziswa i-insulation processing efanelekileyo kwezi zicelo, kusetyenziswa ngokupheleleyo iimpawu ezikhethekileyo ze-enamel coating.
Ngaphezu koko, siza kusebenzisa i-enamel coating insulation kwiingcingo zesinyithi ezixabisekileyo ezifana nesilivere kunye neplatinum xa ziodolwe. Nceda usebenzise le mveliso-ngoku-odolwa.
Uhlobo lweNtambo yeNichrome
I-NiCr80/20, i-NiCr70/30, i-NiCr60/15, i-NiCr90/10, i-NiCr35/20, i-NiCr30/20

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

I-Enameled Ni80Cr20 nichrome 80/20 NiCr Resistance Alloy Wire

Ingcaciso yeMveliso

Eziucingo oluxhathisayo olune-enamelIi-s zisetyenziswe ngokubanzi kwii-resistor ezisemgangathweni, iimoto
iinxalenye, ii-resistors ezijikelezayo, njl. kusetyenziswa i-insulation processing efanelekileyo kwezi zicelo, kusetyenziswa ngokupheleleyo iimpawu ezikhethekileyo ze-enamel coating.

Ngaphezu koko, siza kusebenzisa i-enamel coating insulation kwiingcingo zesinyithi ezixabisekileyo ezifana nesilivere kunye neplatinum xa ziodolwe. Nceda usebenzise le mveliso-ngoku-odolwa.

Uhlobo lweNtambo yeNichrome

I-NiCr80/20, i-NiCr70/30, i-NiCr60/15, i-NiCr90/10, i-NiCr35/20, i-NiCr30/20

Uhlobo lokufaka ubushushu

Igama elifakwe i-insulation enamel	Inqanaba lobushushu ºC (ixesha lokusebenza yi-2000h)	Igama leKhowudi	Ikhowudi ye-GB	Uhlobo lwe-ANSI
Ucingo olune-enamel ye-polyurethane	130	I-UEW	QA	MW75C
Ucingo olufakwe i-polyester enamel	155	I-PEW	QZ	MW5C
Ucingo olune-enamel ye-polyester-imide	180	I-EIW	QZY	MW30C
Ucingo olune-enamel olufakwe i-polyester-imide kunye ne-polyamide-imide olufakwe kabini	200	I-EIWH(DFWF)	QZY/XY	MW35C
Ucingo olune-enamel lwe-polyamide-imide	220	I-AIW	QXY	MW81C

Umxholo weKhemikhali (%)

C	P	S	Mn	Si	Cr	Ni	Al	Fe	Okunye
Ubuninzi
0.03	0.02	0.015	0.60	0.75~1.60	20.0~23.0	Ibhala.	Ubuninzi 0.50	Ubuninzi 1.0	-

Iipropati zoomatshini ze-nichrome wire

Ubushushu obuphezulu beNkonzo eQhubekayo:	1200ºC
Ukuqina kobushushu obuyi-20ºC:	1.09 ohm mm2/m
Uxinano:	8.4 g/cm3
Ukuqhuba kwe-Thermal:	60.3 KJ/m·h·ºC
Umlinganiselo wokwandiswa kobushushu:	18 α×10-6/ºC
Indawo yokunyibilika:	1400ºC
Ukwandiswa:	Ubuncinci be-20%
Ulwakhiwo lweMicrographic:	I-Austenite
Ipropati yeMagnetic:	engekho magnethi

Izinto Ezichaphazela Ubushushu Bokumelana Nombane

20ºC	100ºC	200ºC	300ºC	400ºC	500ºC	600ºC
1	1.006	1.012	1.018	1.025	1.026	1.018
700ºC	800ºC	900ºC	1000ºC	1100ºC	1200ºC	1300ºC
1.01	1.008	1.01	1.014	1.021	1.025	-

Uhlobo lweNtambo ye-Alloy engenanto

Iingxubevange esizenzayo ziyi-enamelled wire ye-Copper-nickel alloy, i-Constantan wire, i-Manganin wire. I-Kama Wire, i-NiCr Alloy wire, i-FeCrAl Alloy wire njl.

ipropathi ephambili uhlobo		I-Cuni1	I-CuNI2	I-CuNI6	I-CuNi8	I-CuNI10	I-CuNi14	I-CuNi19	I-CuNi23	I-CuNi30	I-CuNi34	I-CuNI44
ikhemikhali ephambili ukwakheka	Ni	1	2	6	8	10	14.2	19	23	30	34	44
	MN	/	/	/	/	/	0.3	0.5	0.5	1.0	1.0	1.0
	CU	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla
ukusebenza kakhulu ubushushu		/	200	220	250	250	300	300	300	350	350	400
uxinano/cm3		8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9
ukumelana negesi kwi-20 °c		0.03 ± 10%	0.05±10%	0.10±10%	0.12±10%	0.15±10%	0.20±5%	0.25±5%	0.30±5%	0.35±5%	0.40±5%	0.49±5%
umlinganiselo wobushushu we ukuxhathisa		<100	<120	<60	<57	<50	<38	<25	<16	<10	-0	<-6
i-mpa enamandla okutyhafa		>210	>220	>250	>270	>290	>310	>340	>350	>400	>400	>420
ubude		>25	>25	>25	>25	>25	>25	>25	>25	>25	>25	>25
indawo yokunyibilika °c		1085	1090	1095	1097	1100	1115	1135	1150	1170	1180	1280
i-coefficient ofconductivity		145	130	92	75	59	48	38	33	27	25	23