Wamkelekile kwiwebhusayithi zethu!
English
1
Ibhena (1)
Ibhena (3)
Ibhena (2)
Uhlobo lwe-K Thermocouple Probe 1.5×100mm Isingxobo sentsimbi engagqwaliyo 5m I-Lead eLukiweyo Umfanekiso obonisiweyo
  • Uhlobo lwe-K Thermocouple Probe 1.5×100mm Isingxobo sentsimbi engagqwaliyo 5m I-Lead elukiweyo

Uhlobo lwe-K Thermocouple Probe 1.5×100mm Isingxobo sentsimbi engagqwaliyo 5m I-Lead elukiweyo

Inkcazo emfutshane:


  • Uhlobo lwe-thermocouple:Uhlobo K
  • Izinto zoMngxunya:304 Intsimbi Engagqwaliyo
  • Ubukhulu besingxobo:1.5mm (ububanzi) × 100mm (ubude); ukunyamezelana ±0.05mm / ±1mm
  • Ububanzi bomqhubi:2×0.35mm (±0.003mm)
  • Ubude beLead:5m (ingenziwa ngokwezifiso: 1m/2m/3m/10m)
  • Izinto zokuvala ubushushu:Intsimbi engatyiwayo ephothiweyo (uvavanyo lwe-800℃)
  • Uluhlu lobushushu bokusebenza:-40℃ ukuya kwi-800℃ (iyaqhubeka); -40℃ ukuya kwi-900℃ (ixesha elifutshane ≤30min)
  • Iklasi yokuchaneka:Iklasi 1

    • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    Isishwankathelo seProbe yeType K Thermocouple
    Le sensor yobushushu obuchanekileyo evela kwiHuona New Material ine-Type K thermocouple junction ene-304 stainless steel protective sheath kunye ne-stainless steel braided lead wire insulated. Yenzelwe ukusebenza okuzinzileyo kwi--40℃ ukuya kwi-800℃ (eqhubekayo) kunye ne-900℃ (ixesha elifutshane), inika impendulo ekhawulezayo yobushushu kunye nokuthembeka kwexesha elide kwizicelo zoshishino.
    Iinkcukacha zobugcisa
    Iinkcukacha ezingundoqo
    Uphawu Ixabiso
    Uhlobo lweThermocouple Uhlobo K (iChrome/iAlumeli)
    Izinto zeSingxobo 304 Intsimbi Engagqwaliyo
    Ubukhulu beSheath 1.5mm × 100mm (± 0.05mm/± 1mm)
    Ububanzi bomqhubi 2×0.35mm (±0.003mm)
    Ubude beNkokeli 5m (ingenziwa ngokwezifiso)
    Ubushushu bokusebenza -40℃ ukuya kwi-800℃ (iyaqhubeka)
    -40℃ ukuya kwi-900℃ (ixesha elifutshane)
    Iklasi yokuchaneka Iklasi 1 (IEC 60584-2)
    Iinkcukacha zeMveliso
    Into Inkcazo
    Ifomu yoNikezelo Iprobe enye (edityaniswe kwangaphambili)
    Uhlobo lweJunction Isekelwe phantsi (impendulo ekhawulezayo)
    Ukuqhubekeka Ukutywina, ukukrwela, ukuphelisa ngokwezifiso
    Ukupakisha Ingxowa enganyangekiyo enebhokisi yokukhusela
    Iingenelo eziphambili
    Impendulo ekhawulezayo kakhulu yobushushu kunye nokuchaneka
    • Isingxobo sobubanzi obuyi-1.5mm sibonelela ngexesha lokuphendula ngobushushu (τ₅₀) ≤1.5s kwi-800℃
    • Ukuchaneka kweKlasi 1 kunye nempazamo ye-thermoelectric potential ≤±1.5℃ (0-400℃) / ±0.4% t (400-800℃)
    Ukhuseleko lweNsimbi Engagqwaliyo
    • Isingxobo sentsimbi engagqwaliyo engama-304 kunye ne-lead ephothiweyo enokuxhathisa ukugoba, ukukrala, kunye nokugqwala
    • Iyamelana nokusebenza okuqhubekayo ukuya kuthi ga kwi-800℃ kwaye igcina ulwakhiwo lwayo lusemgangathweni
    I-Flexible Braided Lead kunye ne-processability
    • I-lead egobileyo yentsimbi engatyiwayo inika ukuguquguquka okuphezulu (ubuncinci berediyasi yokugoba ≥10× ububanzi bekhebula)
    • Iziphelo zomqhubi ezibonakalayo ziqinisekisa ukutywinwa okuthembekileyo kwiikhonkco okanye kwiinkqubo zolawulo
    Ukuthobela imithetho kunye nemigangatho
    Iyahambelana nemigangatho ye-IEC 60584-2, GB/T 4989-2013, ASTM E230, kunye neRoHS 2.0. Umenzi uqinisekiswe yi-ISO 9001 kunye ne-IATF 16049.
    Izicelo eziqhelekileyo
    • Uvavanyo lobushushu kwimizi-mveliso: ukujonga i-furnace, ukuphonononga unyango lobushushu besinyithi
    • Ukulungiswa kokutya: umlinganiselo wobushushu be-oven kunye nokutya
    • Ilebhu kunye noPhando noPhuhliso: izixhobo zophando kunye namagumbi okusingqongileyo
    • Iimoto kunye ne-elektroniki: uvavanyo lweenjini, ukujonga ibhetri, ukujonga iprofayili yobushushu
    Ukwenziwa ngokwezifiso kuyafumaneka:Ububanzi besingxobo (1.0-3.0mm), ubude besingxobo (50-500mm), ubude bentsimbi (0.5-10m), ububanzi bomqhubi (0.2-0.8mm), kunye nohlobo lokudibana.
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale