Wamkelekile kwiwebhusayithi zethu!
English
1
Ibhena (1)
Ibhena (3)
Ibhena (2)
Umfanekiso obonisiweyo weTankii44/CuNi44/NC050/6J40 Strip Superior Corrosion Resistance
  • I-Tankii44/CuNi44/NC050/6J40 Strip Superior Corrosion Resistance

I-Tankii44/CuNi44/NC050/6J40 Strip Superior Corrosion Resistance

Inkcazo emfutshane:


  • Igama lemveliso:Umcu weCuNi44
  • Ulwakhiwo lweeKhemikhali (ubunzima%):Cu: 55.0-57.0%; Ni: 43.0-45.0%; Fe: ≤0.5%; UMn: ≤1.0%; Si: ≤0.1%; C: ≤0.05%
  • Uluhlu Lobukhulu:0.01mm - 2.0mm
  • Uluhlu Lobubanzi:5mm - 600mm
  • Iinketho zoBundlobongela:Ithambile (ifakwe i-anneal), Iqinile kancinci, Iqinile (iqengqeleka ngokubandayo)
  • Tensile strength:Ithambile: 450-500 MPa; Isiqingatha-sobunzima: 500-550 MPa; Iqinile: 550-600 MPa
  • Unikeze Amandla:Ithambile: 150-200 MPa; Isiqingatha-sobunzima: 300-350 MPa; Iqinile: 450-500 MPa
  • Ukwandiswa (25°C):Ithambile: ≥25%; Isiqingatha-iqinile: 15-20%; Iqinile: ≤10%

    • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    Ingcaciso yeMveliso

    Umcu weCuNi44

    Isishwankathelo seMveliso

    Umcu weCuNi44, umcu we-alloy we-copper-nickel osebenza kakuhle ophuhliswe kwaye wenziwa yiTankii Alloy Material, unomxholo we-nickel oqhelekileyo we-44% kunye nobhedu njengesiseko sesinyithi. Ngokusebenzisa ubuchwepheshe bethu obuphambili bokuqengqeleka okubandayo kunye nokuchaneka, lo mcu ufikelela kunyamezelo oluqinileyo kunye neempawu zezinto ezihambelanayo kwiibhetshi. Udibanisa uzinzo olubalaseleyo lokumelana nombane, ukumelana nokugqwala okuphezulu, kunye nobuchule obuhle kakhulu—ukufumana ibhalansi egqibeleleyo yezixhobo zombane ezichanekileyo, izinto zesensor, kunye nezixhobo zoshishino ezifuna ukuthembeka kwexesha elide. Njengemveliso ephambili kwipotifoliyo ye-alloy strip kaHuona, usebenza ngcono kunee-alloy ze-alloy ze-nickel ezisezantsi ngokuzinza ngelixa ugcina iindleko zisebenza kakuhle kwizicelo ezinkulu.

    Iimpawu eziQhelekileyo

    • Ibanga le-Alloy: CuNi44 (uCopper-Nickel 44)
    • Inombolo ye-UNS: C71500
    • Imigangatho yaMazwe ngaMazwe: Iyahambelana ne-DIN 17664, i-ASTM B122, kunye ne-GB/T 2059
    • Ifomu: Umcu osicaba osongiweyo (iiprofayili ezenziwe ngokwezifiso ziyafumaneka xa ziceliwe)
    • Umenzi: Izinto zeTankii Alloy, eziqinisekiswe yi-ISO 9001 kunye ne-RoHS ngomgangatho kunye nokuthobela okusingqongileyo

    Iingenelo eziphambili (xa kuthelekiswa nee-Alloys ezifanayo)

    I-CuNi44 strip ivelele kusapho lwe-copper-nickel alloy ngenxa yeenzuzo zayo zokusebenza ezijoliswe kuzo:

     

    • Ukumelana nombane okuZinzileyo kakhulu: Ukumelana nombane okungama-49 ± 2 μΩ·cm kwi-20°C kunye ne-coefficient yokumelana nobushushu obuphantsi (TCR: ±40 ppm/°C, -50°C ukuya kwi-150°C)—okungcono kakhulu kuneCuNi30 (TCR ±50 ppm/°C) kunye nobhedu olucocekileyo, okuqinisekisa ukushukuma okuncinci kwezixhobo zokulinganisa ngokuchanekileyo.
    • Ukumelana Okugqwesileyo Kokugqwala: Iyamelana nokugqwala okusemoyeni, amanzi acocekileyo, kunye neendawo ezibuthathaka zeekhemikhali; idlula uvavanyo lwe-ASTM B117 yetyuwa oluthatha iiyure ezili-1000 nge-oxidation engaphantsi, iphumelela kakhulu kwi-bronze nakwi-bronze kwiindawo zoshishino ezinzima.
    • Ukwakheka Okugqwesileyo: Ukuqina okuphezulu kwenza ukuba ukuqengqeleka okubandayo kube ziigeyiji ezincinci (0.01mm) kunye nokunyathela okuntsonkothileyo (umz., iigridi ze-resistor, ii-sensor clips) ngaphandle kokuqhekeka—kusebenza ngakumbi kunee-alloy strips ezinobunzima obuphezulu ezifana neCuNi50.
    • Iipropati zoMbane eziLungelelanisiweyo: Amandla okutsalwa kwe-450-550 MPa (efakwe i-annealed) kunye nokwandiswa kwe-≥25% kuhambelana phakathi kozinzo lwesakhiwo kunye nokukwazi ukucutshungulwa, ezifanelekileyo zombini izixhobo ezithwala umthwalo kunye nezo zisebenza ngomatshini ochanekileyo.
    • Ukuchaneka Okusebenzayo Ngeendleko: Inika ukusebenza okufana nee-alloys zesinyithi ezixabisekileyo (umz., i-manganin) ngexabiso eliphantsi, okwenza ukuba ilungele iindawo zombane ezichanekileyo eziveliswa ngobuninzi.

    Iinkcukacha zobugcisa

    Uphawu Ixabiso (Eliqhelekileyo)
    Ulwakhiwo lweeKhemikhali (wt%) Cu: 55.0-57.0%; Ni: 43.0-45.0%; Fe: ≤0.5%; UMn: ≤1.0%; Si: ≤0.1%; C: ≤0.05%
    Uluhlu Lobukhulu 0.01mm – 2.0mm (ukunyamezelana: ±0.0005mm ukuya ku-≤0.1mm; ±0.001mm ukuya ku->0.1mm)
    Uluhlu lobubanzi 5mm – 600mm (ukunyamezelana: ±0.05mm ukuya ku-≤100mm; ±0.1mm ukuya ku->100mm)
    Iinketho zoBundlongondlongo Ithambile (ifakwe i-anneal), Iqinile kancinci, Iqinile (iqengqeleka ngokubandayo)
    Tensile strength Ithambile: 450-500 MPa; Isiqingatha-sobunzima: 500-550 MPa; Iqinile: 550-600 MPa
    Unikeze Amandla Ithambile: 150-200 MPa; Isiqingatha-sobunzima: 300-350 MPa; Iqinile: 450-500 MPa
    Ukwandiswa (25°C) Ithambile: ≥25%; Isiqingatha-iqinile: 15-20%; Iqinile: ≤10%
    Ubunzima (HV) Ithambile: 120-140; Isiqingatha-ubunzima: 160-180; Iqinile: 200-220
    Ukuxhathisa (20°C) 49 ± 2 μΩ·cm
    Ukuqhuba Ubushushu (20°C) 22 W/(m·K)
    Uluhlu lobushushu bokusebenza -50°C ukuya kwi-300°C (ukusetyenziswa rhoqo)

    Iinkcukacha zeMveliso

    Into Inkcazo
    Umphezulu wokugqiba I-annealed eqaqambileyo (Ra ≤0.2μm), i-matte (Ra ≤0.8μm), okanye ipholishiwe (Ra ≤0.1μm)
    Ukuthe tyaba ≤0.05mm/m (ngokobukhulu ≤0.5mm); ≤0.1mm/m (ngokobukhulu >0.5mm)
    Ukungakwazi ukusebenza Igqwesile (iyahambelana nokusika, ukunyathela, ukugoba, kunye nokukrola i-CNC)
    Ukuxinana Ifanelekile ukuwelda kunye nokunyibilikisa i-TIG/MIG (yenza amalungu angamelani nokugqwala)
    Ukupakisha Ivalwe nge-vacuum kwiingxowa ezichasene ne-oxidation ezine-desiccant; iziqwenga zomthi (zemiqulu) okanye iibhokisi (zeeshiti ezisikiweyo)
    Ukwenziwa ngokwezifiso Ukunqumla kube bububanzi obuncinci (≥5mm), iziqwenga ezisikiweyo zibe zinde, ubushushu obukhethekileyo, okanye uboya obungangcolisiyo

    Izicelo eziqhelekileyo

    • Izinto zoMbane: Izithinteli zentambo ezichanekileyo, ii-current shunts, kunye nezinto ze-potentiometer—ezibalulekileyo kwiimitha zamandla kunye nezixhobo zokulinganisa.
    • Izinzwa kunye nezixhobo: Iigridi zokulinganisa ubunzima, ii-substrates zesinzwa sobushushu, kunye nee-transducers zoxinzelelo (ukumelana okuzinzileyo kuqinisekisa ukuchaneka komlinganiselo).
    • Izixhobo zoShishino: Iikliphu, iiterminal, kunye nezihlanganisi ezimelana nokugqwala kwiinkqubo zaselwandle, zeekhemikhali, kunye neze-HVAC.
    • Izixhobo zonyango: Izinto ezincinci kwizixhobo zokuxilonga kunye nezinzwa ezinxitywayo (ezihambelanayo ne-biocompatible kwaye ezimelana nokugqwala).
    • I-Aerospace kunye neeMoto: Izinto zokufudumeza ezisebenzisa amandla aphantsi kunye noqhagamshelwano lombane kwiinkqubo zolawulo lweenqwelo moya kunye nezithuthi zombane.

     

    Izinto zeTankii Alloy zilawula umgangatho ngokungqongqo kwiCuNi44 strip: ibhetshi nganye idlula kuhlalutyo lwe-XRF chemical composition, uvavanyo lwepropathi yoomatshini (ukutsalwa, ubulukhuni), kunye nokuhlolwa kobukhulu (i-laser micrometry). Iisampuli zasimahla (100mm×100mm) kunye neengxelo zovavanyo lwezinto (MTR) ziyafumaneka xa ziceliwe. Iqela lethu lobuchwephesha libonelela ngenkxaso eyenzelwe wena—kubandakanya ukukhethwa kobushushu bokunyathela, ukulungiswa kweeparameter zokugrumba, kunye neengcebiso zokukhusela ukugrumba—ukunceda abathengi baphucule ukusebenza kweCuNi44 kwizicelo zabo.
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale