Wamkelekile kwiwebhusayithi zethu!
English
1
Ibhena (1)
Ibhena (3)
Ibhena (2)
I-Stablohm 650 Flat Wire Nicr8020 Nickel kunye ne-Chrome Flat Wire enokumelana okuhle kakhulu Umfanekiso obonisiweyo
  • I-Stablohm 650 Flat Wire Nicr8020 Nickel kunye ne-Chrome Flat Wire enokumelana okuhle kakhulu

I-Stablohm 650 Flat Wire Nicr8020 Nickel kunye ne-Chrome Flat Wire enokumelana okuhle kakhulu

Inkcazo emfutshane:

I-Stablohm 650 Flat Wire yePremium: I-NiCr8020 nickel-chrome wire esebenza kakuhle kakhulu, eyenzelwe izixhobo zokufudumeza zoshishino, izinto zombane, kunye neenkqubo zobushushu ezichanekileyo. Le ntambo yeStablohm 650 inika ukuveliswa kobushushu okuzinzileyo, ukuqina okuqinileyo kobushushu obuphezulu, kunye nokuqhuba okuthembekileyo—ifanelekile kwizicelo zokufudumeza ezifuna ubuninzi. Sinikezela ngamaxabiso athengiswayo ngobuninzi, ukujonga umgangatho ngokungqongqo, kunye nokuthunyelwa kwehlabathi jikelele kwe-Stablohm 650 NiCr8020 wire flat.


  • Igama lemveliso:I-Stablohm 650 Flat Wire
  • Izixhobo:I-Nickel kunye ne-Chrome
  • Uhlobo:Ucingo lweNichrome
  • I-MOQ:5kg
  • Umenzi:Ewe
  • Ixesha lesampulu:Phantse iveki
  • Inkxaso yokwenza ngokwezifiso:Ewe
  • Ukupakisha:Ibhokisi/ Umthi

    • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    Ulwazi oluSisiseko.

     

    Uphawu Iinkcukacha Uphawu Iinkcukacha
    Imodeli INOMBOLO. IStablohm 650 Ubunyulu I-Ni≥75%
    I-alloy I-Nichrome Alloy Uhlobo Ucingo oluSicaba
    Ulwakhiwo oluPhambili I-Ni ≥75%,Cr 20-23% Iimpawu Ukumelana okuhle nokungabandakanywa kwe-oxidation
    Uluhlu lwesicelo Isithinteli, iHeater Ukumelana nombane 1.09 Ohm·mm²/m
    Eyona iPhakamileyo
    Sebenzisa Ubushushu    		 1400°C Uxinano 8.4 g/cm³
    Ukwandiswa ≥20% Ukuqina 180 HV
    Ukusebenza Okukhulu
    Ubushushu    		 1200°C Iphakheji yoThutho Ibhokisi/Ityala lomthi
    Inkcazo Yenzelwe wena Uphawu lwentengiso ITankii
    Imvelaphi iTshayina Ikhowudi ye-HS 7505220000
    Umthamo weMveliso Iitoni ezili-100/ngenyanga

    Intambo yeNickel-Chromium 80/20 (Intambo yeNiCr 80/20)​

    Ucingo lwe-alloy olusebenza kakuhle (80% Ni, 20% Cr) oluyilelwe ukusetyenziswa kubushushu obuphezulu kunye nombane, lufanelekile kwiimeko ezifuna kakhulu kwimizi-mveliso nakubathengi.
    Iimpawu eziphambili​
    • Uzinzo lobushushu obuphezulu: Isebenza ngokuqhubekayo ukuya kuthi ga kwi-1,100°C (2,012°F); incopho yexesha elifutshane kwi-1,250°C (2,282°F).
    • Ukumelana ne-Oxidation: Yenza ifilimu ekhuselayo ye-Cr₂O₃ ukumelana nokugqwala xa kufudunyezwa nge-cyclic heating.
    • Ukumelana Okuzinzileyo: ~1.10 Ω·mm²/m (20°C) ukuze kubekho ubushushu obufanayo, akukho mabala ashushu.
    • Ubuchule Obulungileyo: Kulula ukwenza (ukuzoba, ukujija) ngelixa ugcina amandla kumaqondo obushushu aphezulu.
    Iingenelo eziPhambili​
    • Ubomi benkonzo ende kunciphisa iindleko zokulungisa.
    • Ukuguqulwa kobushushu okusebenzisa amandla kakuhle (kunciphisa inkunkuma).
    • Isebenziseka lula kwiifom ezenziwe ngokwezifiso (ucingo olucolekileyo, iikhoyili, iiribhoni).
    • Ixabiso eliphantsi xa kuthelekiswa nezinye iindlela zokusetyenziswa kobushushu obuphezulu ixesha elide.
    Izicelo eziqhelekileyo​
    • Imizi-mveliso: Izinto zokufudumeza ze-furnace/i-oven, izixhobo zeplastiki zokubumba.
    • Indlu: Izitovu zombane, iitoaster, izifudumezi zamanzi.
    • Iimoto: Izifudumezi zezihlalo, izinyibilikisi.
    • I-Aerospace/Medical: Ulawulo lobushushu lwe-Avionics, izixhobo zokubulala iintsholongwane.
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale