I-nickel ye-nickel 200 / engacocekanga i-no2200 i-0.25mm
Ibanga: i-NI200, ni201, N4, N6
I-Decting ephezulu
Ukunganyangeki kwe-Porrosion
Amandla amahle ngoomatshini
Inkcazo ye-Alloy
I-Nickel 200/201 yenqanaba elisetyenziswe ngokubanzi, icaciswe ngokubanzi i-COTPS ye-Toveristor, iiTubs ze-elektroniki, ezikhokelela kwizinto ze-elektroniki / iingcingo ze-elektroniki / iingcingo ze-wire-mesh. Isetyenziswe kwifom yezicelo ezahlukeneyo kubandakanya iibhetri ze-NI-CD.
Imeko yokubonelela
I-Nickel 200, 201 kwaye i-205 ibonelelwe kwezi meko zilandelayo:
Ukubanda kakhulu, umsindo okhethekileyo.
Ukubanda kutengile, kutshitshiswa. Inyibilikisiwe kwaye ndiyinqumle ubude.
Phawula:
NUS N02201 (i-ASTM B 162) Ifana ne-N4 (GB / T 2054).
NUS N02200 (i-ASTM B 162) okufanayo ne-N6 (GB / T 2054).
Iifom
I-Coil-Strip, i-foil, iribbon
Ucingo-iprofayile, jikelezo, iflethi, isikwere
I-ROD, i-bar, exolelayo, iplate, iphepha
Ukwakhiwa kweekhemikhali
Ibanga | Yi + co | Cu | Si | Mn | C | Mg | S | P | Fe |
N4 | 99.9 | I-0.015 | I-0.03 | 0.002 | I-0.01 | I-0.01 | 0.001 | 0.001 | I-0.04 |
N6 | 99.6 | I-0.10 | I-0.10 | I-0.05 | I-0.10 | I-0.10 | 0.005 | 0.002 | I-0.10 |
I-NI201 | I-99.0 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.02 | / | ≤0.01 | / | ≤0.40 |
Ni200 | I-99.0 | I-0.20 | I-0.30 | I-0.30 | I-0.15 | / | I-0.01 | / | 0.40 |
I-nickel foages
Ibanga | Umdubuli ococekileyo uNickel 99.6% / 99.9% |
Ubukhulu | I-0.002 ukuya kwi-2.50 mm |
Ukuqiqa | +/- 5% (Uqikelelo olukhethekileyo luyafumaneka) |
Ububanzi | Ukuya kuthi ga kwi-350mm ububanzi |
Ubungakanani be-coil | Ukuya kwi-80 kg ngaphandle kwe-wels |
I-ranger yomsindo | I-ASONIFIFIFIFIFIFIFI FIT |
I-nickel foil yefilimu
Ubukhulu | Ubukhulu isibonelelo | Burr ukuphakama | Ububanzi kunye nokunyamezelana | |||||
2≤w <10 | 10≤w <50 | I-50≤w <100 | I-100≤w <150 | I-150≤w <200 | I-200≤w | |||
I-0.02≤t <0.05 | ± 0.003 | ≤0.005 | ± I-0.05 | ± 0.10 | ± 0.15 | ± 0.20 | ± 0.30 | ± 0.50 |
I-0.05≤t <0.1 | ± 0.005 | ≤0.01 | ||||||
I-0.1ºt <0.2 | ± 0.008 | ≤0.015 | ||||||
I-0.2≤t <0.3 | ± 0.012 | ≤0.02 | ||||||
I-0.3≤t <0.4 | ± 0.015 | ≤0.03 | ± I-0.10 | ± 015 | ± 0.25 | ± 0.50 | ± 0.80 | ± 1.00 |
I-0.4≤t <0.6 | ± 0.025 | ≤0.05 | ||||||
I-0.6≤t <0.8 | ± 0.030 | ≤0.06 | ± I-0.30 | ± 0.40 | ± 0.50 | ± 0.50 | ± 0.80 | ± 1.00 |
I-0.8≤t <1.0 | ± 0.040 | |||||||
1.0≤t <1.2 | ± 0.050 | ≤0.08 | ± 0.50 | ± 0.50 | ± 0.80 | ± 1.00 | ± 1.00 | ± 1.50 |
1.2≤t <1.4 | ± 0.060 | |||||||
1.4≤t <1.7 | ± 0.070 | ≤0.10 | ||||||
1.7≤t <2.0 | ± 0.080 |