Wamkelekile kwiwebhusayithi zethu!
English
1
Ibhena (1)
Ibhena (3)
Ibhena (2)
Ibha ye-Ni35Cr20 6mm engekho magnethi yeeResistors zoMbane ezixabisa kakhulu Umfanekiso obonisiweyo
  • Ibha ye-Ni35Cr20 6mm engekho magnethi yeeResistors zoMbane ezixabisa kakhulu

Ibha ye-Ni35Cr20 6mm engekho magnethi yeeResistors zoMbane ezixabisa kakhulu

Inkcazo emfutshane:

I-NiCr 35 20 (1.4860) ingasetyenziswa kubushushu bokusebenza obufikelela kwi-1000°C. I-alloy ye-nickel-chromium 35/20 iphawuleka ngokukodwa ngokuchasana okuphezulu kunye namaxabiso aphantsi xa ithelekiswa nezinye ii-alloy ze-nickel-chromium. Nangona inomxholo ophezulu wesinyithi, i-NiCr3520 ayixhathisi kwi-oxidation kunye nokubola kweekhemikhali. I-Nichrome 35/20 ayinamandla emagnethi.


  • Inqanaba:I-Ni30Cr20
  • Ubungakanani:6mm
  • Uphawu:ITankii
  • Imilo:ibha
  • Ubuninzi (g/cm³):7.9
  • Ipropati yeMagnetic:akukho

    • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

         I-NiCr 35 20 (1.4860) isetyenziswa njengezixhobo zombane kwizixhobo zasekhaya nakwezinye izixhobo zokufudumeza ngombane. Iyakwazi ukuguquguquka emva kokusetyenziswa ixesha elide, inamandla oomatshini xa ishushu kakhulu kwaye iyakwazi ukudityaniswa. Ubushushu obuphezulu bokusebenza emoyeni yi-+600°C xa isetyenziselwa iingcingo ezixhathisayo kunye ne-+1050°C xa isetyenziselwa iingcingo zokufudumeza.

    • ii-resistor zombane ezixabisa kakhulu kunye neentambo zokufudumeza.
    • izinto zokufudumeza ngombane (iingubo zombane kunye neephedi, izihlalo zeemoto, izifudumezi zebhodi esezantsi, izifudumezi zomgangatho, izithinteli).
    • izitofu zoshishino ukuya kuthi ga kwi-1000°
    • iintambo zokufudumeza, ii-rope heaters ii-rope heaters kwizinto zokunyibilikisa nokususa i-icing
    Ibanga I-Ni80Cr20 I-Ni70Cr30 I-Ni60Cr23 I-Ni60Cr15 I-Ni35Cr20 IKarma UEvanohm
    Ulwakhiwo oluqhelekileyo% Ni I-Bal I-Bal 58.0-63.0 55.0-61.0 34.0-37.0 I-Bal I-Bal
      Cr 20.0-23.0 28.0-31.0 21.0-25.0 15.0-18.0 18.0-21.0 19.0-21.5 19.0-21.5
      Fe ≦1.0 ≦1.0 I-Bal I-Bal I-Bal 2.0-3.0 –
            I-Al1.0-1.7 Ti 0.3-0.5     Al2.7-3.2 Mn0.5-1.5 Al2.7-3.2 Cu2.0-3.0 Mn0.5-1.5
    Ubushushu obuphezulu bokusebenza(°C) 1200 1250 1150 1150 1100 300 400
    Ukuqina kwakhona (Ω/cmf, 20℃) 1.09 1.18 1.21 1.11 1.04 1.33 1.33
    Ukuqina kwakhona (uΩ/m, 60°F) 655 704 727 668 626 800 800
    Uxinano(g/cm³) 8.4 8.1 8.4 8.2 7.9 8.1 8.1
    Ukuqhuba kwe-Thermal (KJ/m·h·℃) 60.3 45.2 45.2 45.2 43.8 46.0 46.0
    I-Coefficient yoKwandiswa okuLula (×10¯)6/℃)20-1000℃) 18.0 17.0 17.0 17.0 19.0 - -
    Indawo yokunyibilika(℃) 1400 1380 1370 1390 1390 1400 1400
    Ubulukhuni (Hv) 180 185 185 180 180 180 180
    Amandla okuThamba (N/mm2 ) 750 875 800 750 750 780 780
    Ukwandiswa(%) ≥20 ≥20 ≥20 ≥20 ≥20 10-20 10-20
    Ulwakhiwo lweMicrographic i-austenite i-austenite i-austenite i-austenite i-austenite i-austenite i-austenite
    IPropathi yeMagnetic Hayi Hayi Hayi Kancinci Hayi Hayi Hayi
    Ubomi obukhawulezayo (h/℃) ≥81/1200 ≥50/1250 ≥81/1200 ≥81/1200 ≥81/1200 - -

     

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale