China Nickel-base Alloy Supermalloy FeNi50 Mu 49 Round Rod / Bar Ukwenziwa kunye Factory

I-Nickel-base Alloy Supermalloy FeNi50 Mu 49 Round Rod/Bar

Inkcazelo emfutshane:

Inombolo yoMfanekiso:1j50

Igama lebrand:TANKII

Izinto:I-alloy echanekileyo

Ukuqulunqwa kwemichiza:Ni50

Ukwandiswa komlinganiso womgca:9.2

Ubuninzi:8.2

Indawo yeCurie:500

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

I-Nickel-base Alloy Supermalloy FeNi50 Mu 49 Round Rod/Bar

FeNiI-50 yi-nickel-iron, i-alloy magnetic ethambileyo equlethe i-50% ye-nickel. Ikakhulu isetyenziswa kwiindawo ezimbini, ukuguqulwa kwamandla kunye nokulungiswa kolwazi

Kwishishini lamandla, ubukhulu becala kwindawo yamagnetic ephezulu inokufakwa kwemagneti ephezulu kunye nelahleko ephantsi ye-alloy. Kushishino lwe-elektroniki, ikakhulu kwi-alloy ephantsi okanye ephakathi enokufikeleleka okuphezulu kunye namandla aphantsi okunyanzeliswa. Kwiifrikhwensi eziphezulu ziya kwenziwa kumgca obhityileyo okanye kwialloyi ephezulu yokuxhathisa. Ngokuqhelekileyo ngephepha okanye umcu.

Izixhobo ezithambileyo zemagnethi ekutshintshiseleni ngazo ukusetyenziswa, ngenxa yokutshintshana kwemisinga yemagnethi edityaniswe ngaphakathi kwemathiriyeli, ekhokelela kwilahleko, okukhona kuncinci ukuxhathisa kwealloyi, kokukhona ubukhulu becala, kokukhona kunyuka ukuphindaphindeka kwendawo enemagnethi etshintshanayo, ilahleko yangoku yeeddy inkulu, imagnethi iyancipha ngakumbi. Kule nto, izinto kufuneka zenziwe ishidi elincinci (i-tape), kunye nomphezulu ogqunywe ngongqimba olukhuselayo, okanye ukusetyenziswa kweendlela ezithile kumphezulu ukwenza i-oxide insulating layer, i-alloys enjalo esetyenziswa rhoqo nge-magnesium oxide electrophoresis.

I-iron-nickel alloy ubukhulu becala kusetyenziso lwemagnethi etshintshanayo, ikakhulu intsimbi yedyokhwe, i-relay, iZiguquli zaMandla amaNcinci kwaye zikhuselwe ngokwemagnethi.

Ukuqulunqwa kwemichiza

Ukuqamba	%	C	P	S	Mn	Si	Ni	Cr	Cu	Fe
Umxholo	imiz				0.30	0.15	49.0	-		UBhal
Umxholo	max	0.03	0.02	0.02	0.60	0.30	51.0	-	0.20	UBhal

Ipropati yeMagnetic

IBanga	Spec	Iklasi	D/mm	μ0.4/(mH/m)	μm/(mH/m)	Bs/T	Hc/(A/m)
IBanga	Spec	Iklasi	D/mm	≥			≤
1J50	Imihlulo eQingiweyo eQingiweyo	I	0.05-0.09	2.5	35.0	1.5	20.0
			0.10-0.19	2.9	40.0	1.5	14.4
			0.20-0.34	3.3	50.0	1.5	11.2
			0.35-0.50	3.8	62.5	1.5	9.6
			0.50-1.00	3.8	62.5	1.5	9.6
			1.10-2.50	3.5	56.3	1.5	9.6
		II	0.10-0.19	3.8	43.8	1.5	12.0
			0.20-0.34	4.4	56.3	1.5	10.4
			0.35-0.50	5.0	65.0	1.5	8.8
			0.51-1.00	5.0	50.0	1.5	10.0
			1.10-2.50	3.8	44.0	1.5	12.0
		III	0.05-0.20	12.5	75.0	1.52	4.8
	I-Hot Rolling Strip	-	3-22	3.1	31.3	1.5	14.4
	Ibha eQonxiweyo eshushu	-	8-100	3.1	31.3	1.5	14.4

Isimbo soNikezo

Igama le-alloys	Uhlobo	Ubungakanani
1J50	Ibha	Idia= 8 ~ 100mm	L= 50~1000

Iipropati Zomzimba

Ubuninzi (g/cm3)	8.2
Ukumelana nombane kwi-20ºC (mm2/m)	0.45
Ukwandiswa komlinganiso womgqa (10-6 ºC-1)	9.20
Ukuxhathisa (μΩ·m)	0.45
Indawo yeCurie (ºC)	500
I-Saturation magnetostriction coefficient (10-6)	25.0
Indawo yokunyibilika (ºC)	-