I-China Nickel Alloy Hastelloy C276 Hc-276 Ernicrmo-4 MIG Welding Wire TIG Welding Rod Ukuveliswa kunye noMzi-mveliso

I-Nickel Alloy Hastelloy C276 Hc-276 Ernicrmo-4 MIG Welding Wire TIG Welding Rod

Inkcazo emfutshane:

I-alloy ye-nickel iHastelloy C276 HC-276 ERNiCrMo-4 MIG Intambo yokuwelda ye-TIG welding Intonga
I-AWS A5.14: I-ERNiCrMo-4 yintambo eqinileyo yesiseko seNickel ye-GTAW. Ifanelekile ukuwelda i-INCONEL alloy C-276 kunye nezinye ii-alloys ze-nickel-chromium molybdenum, intsimbi egqunyiweyo, ukuwelda intsimbi yekhabhoni ukuya kwii-alloys zesiseko se-nickel kunye neentsimbi ezingenasici ukuya kwii-alloys ze-nickel. Intsimbi egqunyiweyo iyakwazi ukumelana nokugqwala kwaye ibonakalisa ukumelana okuhle kakhulu nokugqwala kwemingxuma kunye nokuqhekeka kunye namandla aphezulu kunye nokuqina. Iipropati ezigqwesileyo ukuya kuthi ga kwi -196°C.

INOMBOLO YEMODELO:Ucingo lwe-ERNiCrMo-4

Umphezulu:Qazileyo

Uxinano:8.4g/cm3

I-MOQ:15kgs

Ukwenziwa kweekhemikhali:I-Ni-Cr-Mo

Iphakheji yoThutho:Ibhokisi + iPallet

Imvelaphi:IShanghai China

Ikhowudi ye-HS:75052200

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

I-alloy ye-nickelIHastelloy C276I-HC-276I-ERNiCrMo-4MIG Welding wire TIG welding Rod

I-AWS A5.14:I-ERNiCrMo-4yintambo eqinileyo yesiseko seNickel yeGTAW. Ifanelekile ukuwelda i-INCONEL alloy C-276 kunye nezinye ii-alloys ze-nickel-chromium molybdenum, intsimbi egqunyiweyo, ukuwelda intsimbi yekhabhoni ukuya kwii-alloys zesiseko senickel kunye neentsimbi ezingatyiwayo ukuya kwii-alloys ze-nickel. Isinyithi esigudileyo simelana nokugqwala okuphezulu kwaye sibonakalisa ukumelana okuhle kakhulu nokugqwala kwemingxuma kunye nokuqhekeka kunye namandla aphezulu kunye nokuqina. Iipropati ezigqwesileyo ukuya kuthi ga kwi -196°C.

Into	I-ErNiCrMo-3	I-ErNiCrMo-4	I-ErNiCrMo-13	I-ErNiCrFe-7	I-ErNiCr-3	I-ErNiCrCu-7	I-ErCuNi	I-ErNi-1
C	0.1	0.02	0.01	0.04	0.1	0.15	0.03	0.15
Mn	0.05	1	0.5	1	2.5-3.5	4	0.5-1.0	1
Fe	5	4-7	1.5	7-11	3	2.5	0.65	1
P	0.02	0.04	0.015	0.02	0.03	0.02	0.01	0.03
S	0.015	0.03	0.005	0.015	0.015	0.015	0.01	0.015
Si	0.05	0.08	0.1	0.5	0.5	1.25	0.15	0.75
Cu	0.5	0.5	N / A	0.3	0.5	ukuphumla	ukuphumla	0.25
Ni	≥58	ukuphumla	ukuphumla	ukuphumla	≥67	62-69	30-32	≥93
Co	N / A	2.5	0.3	N / A	N / A	N / A	N / A	N / A
Al	0.4	N / A	0.1-0.4	1.1	N / A	1.25	0.15	1.5
Ti	0.4	N / A	N / A	1	0.75	1.5-3	0.5	2-3.5
Cr	20-23	14.5-16.5	22-24	28.5-31	18-22	N / A	N / A	N / A
Nb+Ta	3.5-4.15	N / A	1.8-2.5	0.01	2-3	N / A	N / A	N / A
Mo	8-10	15-17	15-16	0.5	N / A	N / A	N / A	N / A
V	N / A	0.35	N / A	N / A	N / A	N / A	N / A	N / A
W	N / A	3-4.5	N / A	N / A	N / A	N / A	N / A	N / A
Ukuphumla	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5

Uhlobo	Umgangatho	Ulwakhiwo lwekhemikhali ye-Manin %	Isicelo esiqhelekileyo
Ucingo lokuwelda lweNickel	A5.14 ERNi-1	I-Ni ≥ 93 Ti3 Al1 Cr– Mo–	I-ERNi-1 isetyenziselwa ukuwelda i-GMAW, i-GTAW kunye ne-ASAW ye-Nickel 200 kunye ne-201, idibanisa ezi alloys kwi-stainless steels kunye ne-carbon steels, kwaye ezinye iintsimbi zesiseko se-nickel kunye ne-copper-nickel. Zikwasetyenziselwa ukugquma intsimbi.
Ucingo lweNiCuwelding	A5.14 I-ERNiCu-7	Ngo-65 Cr– Mo– Ti2 Okunye: Cu	I-ERNiCu-7 yintambo esisiseko se-copper-nickel alloy yokuwelda i-GMAW kunye ne-GTAW ye-Monel alloys 400 kunye ne-404. Ikwasetyenziselwa ukugquma intsimbi emva kokufaka okokuqala Umaleko we-nickel engama-610.
Ucingo lokuwelda lweCuNi	A5.7 I-ERCuNi	Ni 30 Cr– Mo– Okunye: Cu	I-ERCuNi isetyenziselwa ukuwelda i-arc yesinyithi segesi kunye ne-tungsten yegesi. Ingasetyenziswa nangokuwelda i-oxy-fuel ye-70/30, 80/20, kunye ne-90/10 copper. ii-alloy ze-nickel. Umaleko wesithintelo se-alloy ye-nickel 610 uyacetyiswa ngaphambi kokuba kugqunywe intsimbi ngenkqubo yokuwelda ye-GMAW.
I-NiCr ucingo lokuwelda	A5.14 I-ERNiCrFe-3	Ni≥ 67 Cr 20 Mo— Mn3 Nb2.5 Fe2	Ii-electrode ze-Type ENiCrFe-3 zisetyenziselwa ukuwelda ii-alloys ze-nickel-chromium-iron kuzo kunye nokuwelda okwahlukileyo phakathi kwazo ii-alloys ze-nickel-chromium-iron kunye neentsimbi okanye iintsimbi ezingenasici.
I-NiCr ucingo lokuwelda	A5.14 I-ERNiCrFe-7	Ni: Phumla Cr 30 Fe 9	Uhlobo lwe-ERNiCrFe-7 lusetyenziselwa ukuwelda i-gas-tungsten-arc kunye ne-gas-metal-arc welding ye-INCONEL 690.
Ucingo lokuwelda lweNiCrMo	A5.14 I-ERNiCrMo-3	Ni≥ 58 Cr 21 Mo 9 Nb3.5 Fe ≤1.0	I-ERNiCrMo-3 isetyenziswa kakhulu kwi-tungsten yegesi kunye ne-arc yesinyithi segesi kunye neentsimbi ezisisiseko ezihambelanayo. Ikwasetyenziselwa ukuwelda I-Inconel 601 kunye ne-Incoloy 800. Ingasetyenziselwa ukuwelda iindibaniselwano zesinyithi ezahlukeneyo ezifana nentsimbi, intsimbi engagqwaliyo, i-Inconel kunye Ii-alloy ze-Incoloy.
	A5.14 I-ERNiCrMo-4	Ukuphumla kweNi Cr 16 Mo 16 W3.7	I-ERNiCrMo-4 isetyenziselwa ukuwelda izixhobo zesiseko se-nickel-chromium-molybdenum kuzo, kwisinyithi nakwezinye ii-alloys zesiseko se-nickel kunye intsimbi yokugquma.
	A5.14 I-ERNiCrMo-10	Ukuphumla kweNi Cr 21 Mo 14 W3.2 Fe 2.5	I-ERNiCrMo-10 isetyenziselwa ukuwelda izixhobo zesiseko se-nickel-chromium-molybdenum kuzo, kwintsimbi nakwezinye ii-alloys zesiseko se-nickel, kunye kwiintsimbi zokugquma. Ingasetyenziselwa ukutshixa iintsimbi ezingenasici ze-duplex, super duplex.
	A5.14 I-ERNiCrMo-14	Ukuphumla kweNi Cr 21 Mo 16 W3.7	I-ERNiCrMo-14 isetyenziselwa ukuwelda i-gas-tungsten-arc kunye ne-gas-metal-arc ye-duplex, i-super-duplex kunye ne-super-austenitic stainless steels, kunye nee-alloys ze-nickel ezifana ne-UNS N06059 kunye ne-N06022, i-alloy ye-INCONEL C-276, kunye nee-alloys ze-INCONEL 22, 625, kunye ne-686.