Ukuveliswa kweChina CuNi40 / Constantan Enameled Wire 0.1mm 220 Temper Polyimide Ukuveliswa kunye neFektri

Umfanekiso oPhambili weCuNi40 / Constantan Enameled Wire 0.1mm 220 Temper Polyimide

Umenzi weCuNi40 / Constantan Enameled Wire 0.1mm 220 Temper Polyimide

Inkcazo emfutshane:

INOMBOLO YEMODELO:I-Copper Nickel

Isicelo:I-Transformer, Isixhobo, Izixhobo zoMbane, Imoto

Imilo:Ucingo olujikelezayo

Uxinano:8.9g/cm³

Ukwandiswa:≥15

ubude:>25

Ubungakanani bephakheji:20*20*20

Izixhobo:I-CuNiMn Alloy

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

Ingcaciso yeMveliso

I-CuNi40 / Constantan Enameled Wire 0.1mm 220 Temper Polyimide

Ingcaciso yeMveliso

Ingcaciso yeMveliso

Ezi ntambo zokumelana ezine-enamel zisetyenziswa ngokubanzi kwii-resistor ezisemgangathweni, iimoto
iinxalenye, ii-resistors ezijikelezayo, njl. kusetyenziswa i-insulation processing efanelekileyo kwezi zicelo, kusetyenziswa ngokupheleleyo iimpawu ezikhethekileyo ze-enamel coating.

Ngaphezu koko, siza kusebenzisa i-enamel coating insulation kwiingcingo zesinyithi ezixabisekileyo ezifana nesilivere kunye neplatinum xa ziodolwe. Nceda usebenzise le mveliso-ngoku-odolwa.

Uhlobo lokuvala:

1) Ucingo lokumelana nepolyester, udidi lwe-130

2) Ucingo oluhlengahlengisiweyo lokumelana ne-polyester, udidi lwe-155

3) Ucingo lokumelana nePolyesterimide, udidi lwe-180

4) I-Polyester (imide) egqunywe ngocingo lokumelana ne-polyamide-imide, iklasi 200

5) Ucingo lokumelana nePolyimide, udidi 220

		IConstantan 6J40	IConstantan entsha	IManganin	IManganin	IManganin
			6J11	6J12	6J8	6J13
Izinto eziphambili zeKhemikhali %	Mn	1~2	10.5~12.5	11~13	8~10	11~13
	Ni	39~41	-	2~3	-	2~5
	Cu	PHUMLA	PHUMLA	PHUMLA	PHUMLA	PHUMLA
			Al2.5~4.5 Fe1.0~1.6		Si1~2
Uluhlu lobushushu lweZinto		5~500	5~500	5~45	10~80	10~80
Uxinano		8.88	8	8.44	8.7	8.4
g/cm3
Ukuxhathisa		0.48	0.49	0.47	0.35	0.44
μΩ.m,20		±0.03	±0.03	±0.03	±0.05	± 0.04
Ukwandiswa		≥15	≥15	≥15	≥15	≥15
%Φ0.5
Ukuchasa		-40~+40	-80~+80	-3~+20	-5~+10	0~+40
Ubushushu
Ixabiso
α,10 -6 /
I-thermoelectromotive		45	2	1	2	2
nyanzela kwiCopper
μv/(0~100)

Intambo yeBare Wire

eyona nto iphambili ipropati uhlobo		I-Cuni1	I-CuNI2	I-CuNI6	I-CuNI10	I-CuNi19	I-CuNi23	I-CuNi30	I-CuNi34	I-CuNI44
eyona nto iphambili ikhemikhali ukwakheka	Ni	1	2	6	10	19	23	30	34	44
	MN	/	/	/	/	0.5	0.5	1.0	1.0	1.0
	CU	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla
ubuninzi ukusebenza ubushushu		/	200	220	250	300	300	350	350	400
uxinano g/cm3		8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9
ukumelana nokuxhathisa kwi-20 °c		0.03 ± 10%	0.05 ± 10%	0.1 ± 10%	0.15 ± 10%	0.25 ±5%	0.3 ±5%	0.35 ±5%	0.40 ±5%	0.49 ±5%
ubushushu i-coefficient ye ukuxhathisa		<100	<120	<60	<50	<25	<16	<10	-0	<-6
ukuthamba amandla e-mpa		>210	>220	>250	>290	>340	>350	>400	>400	>420
ubude		>25	>25	>25	>25	>25	>25	>25	>25	>25
ukunyibilika inqaku °c		1085	1090	1095	1100	1135	1150	1170	1180	1280
i-coefficient ye ukuhanjiswa komoya		145	130	92	59	38	33	27	25	23