Wamkelekile kwiiwebhusayithi zethu!

Ucingo lweKarma lwe-Precision Resistors (0.02mm, 0.03mm, 0.04mm)

Inkcazelo emfutshane:


  • INOMBOLO yoMfanekiso.karma
  • Uhlobo lweMveliso:I-Nickel Strip
  • Ikhowudi ye-HS:7505220000
  • Isicelo:Inqwelomoya, i-Electronics, iShishini, uNyango, imichiza
  • Umgangatho:JIS, GB, DIN, ASTM, AISI
  • Ubunyulu:>99.95%
  • Ingxubevange:Ingxubevange
  • Umgubo:Akukho Powder
  • Igama lemveliso:I-Karma Foil
  • Elona qondo lobushushu liphezulu:1300c
  • Ukuxhathisa:1.33
  • Ipakethe yezoThutho:Amatyala omthi okanye iibhokisi
  • Imvelaphi:eShanghai
  • Ukuqulunqwa kwemichiza:Ni 80%
  • Iimpawu:Ukuxhathisa okuPhakamileyo, ukuxhathisa okulungileyo kwe-Oxidation
  • Ubuninzi:8.1g/cm3
  • Uphawu lwentengiso:TANKII
  • Inkcazo:0.01-8.0mm
  • Ikhowudi ye-HS:7505220000
  • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    I-Karma Wire ye-Precision Resistors(0.02mm, 0.03mm, 0.04mm)

    1. Ingxubevange yeKarma

    Ingxubevange yeKarma yenziwe ngobhedu, nickel, iAluminiyam kunye neIron njengezona zinto ziphambili. I-resistantivity yi-2 ~ 3 amaxesha aphezulu kune-MENTONG. Inomlinganiselo ophantsi wokushisa wokumelana (i-TCR), i-EMF ephantsi ye-thermal ngokuchasene nobhedu, isigxina esihle sokumelana ixesha elide kunye ne-anti-oxidation enamandla. Uluhlu lwalo lobushushu bokusebenza lubanzi kune-MENTONG (-60 ~ 300ºC). Ilungele ukwenza izinto ezichanekileyo ezichanekileyo kunye noxinzelelo.

    2. Ubungakanani beKarma

    ucingo: 0.01mm-10mm
    Iribhoni: 0.05 * 0.2mm-2.0 * 6.0mm
    Uluhlu: 0.5 * 5.0mm-5.0 * 250mm
    3.Ipropati yeKarma

    igama ikhowudi Uqulunqo Olungundoqo (%) Umgangatho
    Cr Al Fe Ni
    IKarma  6J22 19-21 2.5~3.2 2.0~3.0 bal. JB/T 5328

     

    Igama Ikhowudi (20ºC)
    Ukuxhathisa
    (μΩ.m)
    (20ºC)
    Temp. Coeff.Okuchasa
    (αX10-6/ºC)
    (0~100ºC)
    ThermalEMF vs.Copper
    (μv/ºC)
    Max.ukusebenza
    Ubushushu.(ºC)
    (%)
    Ukwandisa
    (N/mm2)
    Ukuqina
    Amandla
    Umgangatho
    IKarma 6J22 1.33±0.07 ≤±20 ≤2.5 ≤300 >7 ≥780 JB/T 5328

    4. Iimpawu ezahlukileyo zeKarma resistance wire

    1) Ukuqala nge-Nickel Chromium ngocingo olushushu lombane lweClass 1, sitshintshe enye ye-Ni nge
    I-Al kunye nezinye izinto, kwaye ngaloo ndlela ifezekiswe ngokuchaneka kwezinto zokumelana nokuphuculwa
    ukumelana nobushushu obulinganayo kunye nobushushu be-electromotive force ngokuchasene nobhedu.
    Ngokudityaniswa kwe-Al, siye saphumelela ukwenza i-resistivity ye-volume 1.2 amaxesha amakhulu
    kuneNickel Chromium ucingo lobushushu lombane Udidi loku-1 kunye namandla okuqina aphindwe ka-1.3.

    2) I-coefficient yesibini yobushushu be-β ye-Karmalloy wire KMW incinci kakhulu, - 0.03 × 10-6/ K2,

    kwaye ijiko lobushushu lokumelana lijika libe phantse umgca othe ngqo ngaphakathi kobubanzi
    uluhlu lobushushu.

    Ngoko ke, i-coefficient yokushisa imiselwe ukuba ibe yi-coefficient yeqondo lokushisa eliphakathi
    23 ~ 53 °C, kodwa 1 × 10-6/K, i-avareji yomlinganiso wobushushu phakathi kwe-0 ~ 100 °C, nayo
    yamkelwe i-coefficient yobushushu.

    3) Amandla ombane ngokuchasene nobhedu phakathi kwe-1 ~ 100 °C nawo amancinci, ngaphantsi + 2 μV/K, kunye

    ibonisa uzinzo olubalaseleyo kwithuba leminyaka emininzi.

    4) Ukuba oku kuya kusetyenziswa njengento yokumelana ngokuchanekileyo, unyango lobushushu obuphantsi lulo
    Kuyafuneka ukuphelisa ukugqwethwa kokwenziwa komsebenzi njengoko kunjalo kwimeko yocingo lweManganin CMW.


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi