Wamkelekile kwiwebhusayithi zethu!
English
1
Ibhena (1)
Ibhena (3)
Ibhena (2)
Intengiso Eshushu yeCuNi23/NC030 Strip Nickel Copper Alloy yokusetyenziswa koMbane kunye neMizi-mveliso Umfanekiso Ovezweyo
  • I-CuNi23/NC030 Strip Nickel Copper Alloy ethengiswa ngokushushu esetyenziselwa umbane kunye nemizi-mveliso

I-CuNi23/NC030 Strip Nickel Copper Alloy ethengiswa ngokushushu esetyenziselwa umbane kunye nemizi-mveliso

Inkcazo emfutshane:


  • Igama lemveliso:I-CuNi23 Strip
  • Uluhlu Lobukhulu:0.01mm - 2.0mm
  • Uluhlu Lobubanzi:5mm - 600mm
  • Iinketho zoBundlobongela:Ithambile (ifakwe i-anneal), Iqinile kancinci, Iqinile (iqengqeleka ngokubandayo)
  • Tensile strength:Ithambile: 350-400 MPa; Isiqingatha-sobunzima: 450-500 MPa; Iqinile: 550-600 MPa
  • Ukwandiswa (25°C):Ithambile: ≥30%; Isiqingatha-iqinile: 15-25%; Iqinile: ≤10%
  • Ubunzima (HV):Ithambile: 90-110; Isiqingatha-iqinile: 130-150; Iqinile: 170-190
  • Ukuxhathisa (20°C):35-38 μΩ·cm

    • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    Ingcaciso yeMveliso

    I-CuNi23 Strip

    Isishwankathelo seMveliso

    I-CuNi23 strip, i-copper-nickel alloy strip esebenza kakhulu eyenziwe ngobuchule yiTankii Alloy Material, yenziwe ngomxholo we-nickel oqhelekileyo we-23% olungelelaniswe nobhedu njengesinyithi esisisiseko. Isebenzisa ubuchwepheshe bethu obuphambili bokuqengqeleka nokufaka i-annealing, le strip inika uzinzo olubalaseleyo lokumelana nombane, ukumelana nokugqwala, kunye nokukwazi ukwakheka—okwenza ukuba ibe lukhetho olukhethwayo lwezixhobo zombane ezichanekileyo, usetyenziso lokuhombisa, kunye nezixhobo zaselwandle. Ulwakhiwo lwayo olukhethekileyo lwe-alloy lunebhalansi efanelekileyo phakathi kokusebenza kunye neendleko zezinto, luphumelela ngaphezu kwe-CuNi alloys ezisezantsi ze-nickel kuzinzile ngelixa luhlala lufikeleleka ngakumbi kune-nickel grades eziphezulu njengeCuNi44.

    Iimpawu eziQhelekileyo

    • Ibanga le-Alloy: CuNi23 (uCopper-Nickel 23)
    • Inombolo ye-UNS: C70600 (eyona ifanayo isondeleyo; yenzelwe iinkcukacha ze-23% zeNi)
    • Imigangatho yaMazwe ngaMazwe: Iyahambelana ne-DIN 17664, i-ASTM B122, kunye ne-GB/T 2059
    • Ifomu: Umcu osongiweyo (othe tyaba); ububanzi besithuba esenziwe ngokwezifiso buyatholakala
    • Umenzi: Izinto zeTankii Alloy, eziqinisekiswe yi-ISO 9001 ukuze zilawule umgangatho ngendlela ehambelanayo

    Iingenelo eziphambili (xa kuthelekiswa nee-Alloys ezifanayo)

    I-CuNi23 strip ihlukile phakathi kwee-alloys ze-copper-nickel ngenxa yeprofayili yayo yokusebenza ejolise kuyo:

     

    • Ukumelana Okulinganayo kunye neendleko: Ukumelana kwe-35-38 μΩ·cm (20°C)—ngaphezulu kuneCuNi10 (45 μΩ·cm, kodwa kubiza kakhulu) kwaye kungaphantsi kunekopolo ecocekileyo (1.72 μΩ·cm), nto leyo eyenza ukuba ilungele izixhobo zokuchasana eziphakathi ngaphandle kokusebenzisa imali eninzi.
    • Ukumelana Okugqwesileyo Kokugqwala: Iphumelela kakhulu kunethusi kunye nobhedu olucocekileyo emanzini anetyuwa, afumileyo, nakwiindawo ezinobuthi beekhemikhali; idlula uvavanyo lwe-ASTM B117 yetyuwa oluthatha iiyure ezili-1000 kwaye ayina-oxidation ingako.
    • Ukwakheka Okugqwesileyo: Ukuqina okuphezulu kwenza ukuba ukuqengqeleka okubandayo kube ziigeyiji ezincinci kakhulu (0.01mm) kunye nokunyathela okuntsonkothileyo (umz., iigridi ezichanekileyo, iikliphu) ngaphandle kokuqhekeka—kudlule ukusebenza kweCuNi44 ene-nickel ephezulu.
    • Iimpawu zoBushushu obuZinzileyo: Umlinganiselo wokumelana nobushushu obuphantsi (i-TCR: ±50 ppm/°C, -40°C ukuya kwi-150°C), ukuqinisekisa ukushukuma okuncinci kokumelana nobushushu kwiindawo zoshishino ezitshintshatshintsha ubushushu.
    • Ubuhle Obunomtsalane: Ukukhanya kwesilivere kwendalo kususa isidingo sokugquma, kunciphisa iindleko zokulungisa emva kokusetyenziswa kokuhombisa kunye nokwakha.

    Iinkcukacha zobugcisa

    Uphawu Ixabiso (Eliqhelekileyo)
    Ulwakhiwo lweeKhemikhali (wt%) Cu: 76-78%; Ni: 22-24%; Fe: ≤0.5%; UMn: ≤0.8%; Si: ≤0.1%; C: ≤0.05%
    Uluhlu Lobukhulu 0.01mm – 2.0mm (ukunyamezelana: ±0.001mm ukuya ku-≤0.1mm; ±0.005mm ukuya ku->0.1mm)
    Uluhlu lobubanzi 5mm – 600mm (ukunyamezelana: ±0.05mm ukuya ku-≤100mm; ±0.1mm ukuya ku->100mm)
    Iinketho zoBundlongondlongo Ithambile (ifakwe i-anneal), Iqinile kancinci, Iqinile (iqengqeleka ngokubandayo)
    Tensile strength Ithambile: 350-400 MPa; Isiqingatha-sobunzima: 450-500 MPa; Iqinile: 550-600 MPa
    Unikeze Amandla Ithambile: 120-150 MPa; Isiqingatha-sobunzima: 300-350 MPa; Iqinile: 450-500 MPa
    Ukwandiswa (25°C) Ithambile: ≥30%; Isiqingatha-iqinile: 15-25%; Iqinile: ≤10%
    Ubunzima (HV) Ithambile: 90-110; Isiqingatha-iqinile: 130-150; Iqinile: 170-190
    Ukuxhathisa (20°C) 35-38 μΩ·cm
    Ukuqhuba Ubushushu (20°C) 45 W/(m·K)
    Uluhlu lobushushu bokusebenza -50°C ukuya kuma-250°C (ukusetyenziswa rhoqo)

    Iinkcukacha zeMveliso

    Into Inkcazo
    Umphezulu wokugqiba I-annealed eqaqambileyo (Ra ≤0.2μm), i-matte (Ra ≤0.8μm), okanye ipholishiwe (Ra ≤0.1μm)
    Ukuthe tyaba ≤0.05mm/m (ngokobukhulu ≤0.5mm); ≤0.1mm/m (ngokobukhulu >0.5mm)
    Ukungakwazi ukusebenza Igqwesile (iyahambelana nokusika, ukunyathela, kunye nokugoba kwe-CNC; izixhobo azisetyenziswa kakhulu)
    Ukuxinana Ifanelekile ukuwelda kunye nokunyibilikisa i-TIG/MIG (yenza amalungu aqinileyo, amelana nokugqwala)
    Ukupakisha Ivalwe nge-vacuum kwiingxowa ezingangenisi manzi ezine-desiccant; izitya zomthi (zemiqulu) okanye iibhokisi (zeeshiti ezisikiweyo)
    Ukwenziwa ngokwezifiso Ukunqumla kube bububanzi obuncinci (≥5mm), iziqwenga ezisikiweyo zibe zinde, ubushushu obukhethekileyo, okanye uboya obungangcolisiyo

    Izicelo eziqhelekileyo

    • Izinto zombane: Izithinteli ezichanekileyo eziphakathi, ii-current shunts, kunye nezinto ze-potentiometer—apho ukumelana okulinganiselayo kunye neendleko zibalulekile.
    • Izixhobo zoLwandle nezoLwandle: Izixhobo zenqanawa, iziqu zeevalvu, kunye neendawo zokufaka iisensor—ezimelana nokugqwala kwamanzi anetyuwa ngaphandle kweendleko zee-alloys ze-nickel eziphezulu.
    • Ukuhombisa kunye noYilo lweZakhiwo: Iipleyiti zamagama, imihlobiso yezixhobo, kunye neendlela zokwakha—ukukhazimla kwesilivere kunye nokumelana nokugqwala kususa iimfuno zokuplata.
    • Izinzwa kunye nezixhobo: Iintambo zokuhlawula i-thermocouple kunye ne-strain gauge substrates—iipropati zombane ezizinzileyo ziqinisekisa ukuchaneka kokulinganisa.
    • Iimoto: Iiterminal zokudibanisa kunye nezinto ezincinci zokufudumeza—zidibanisa ukwakheka kunye nokumelana nokufuma okungaphantsi komhlaba.

     

    Izinto zeTankii Alloy zivavanya yonke ibhetshi yeCuNi23 strip ngovavanyo oluqatha, kubandakanya uhlalutyo lokwakheka kweekhemikhali, ukuqinisekiswa kwepropathi yoomatshini, kunye nokuhlolwa kobukhulu. Iisampuli zasimahla (100mm×100mm) kunye neengxelo zovavanyo lwezinto (MTR) ziyafumaneka xa ziceliwe. Iqela lethu lobuchwephesha libonelela ngenkxaso eyenzelwe wena—njengokukhetha ubushushu bokunyathela okanye iingcebiso zokukhusela ukugqwala—ukuphucula ukusebenza kweCuNi23 kwizicelo ezithile.
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale