Ukuveliswa kwe-China High Strength High Insulation Performance Nickel Chromium Alloy Ni80Cr20 Nichrome 80 ХН80Ю Enameled Wire Ukwenziwa kunye neFektri

Amandla aphezulu Ukusebenza okuphezulu kokukhusela ukushisa I-Nickel Chromium Alloy Ni80Cr20 Nichrome 80 ХН80Ю I-Enameled Wire Umfanekiso obonisiweyo

Amandla aphezulu Ukusebenza okuphezulu kokukhusela ukushisa I-Nickel Chromium Alloy Ni80Cr20 Nichrome 80 ХН80Ю Ucingo olune-enameled

Inkcazo emfutshane:

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

Ifakwe i-enamel yobushushu obuphezuluI-NichromeUcingo

Ingcaciso yeMveliso

Ezi ntambo zokumelana ezine-enamel zisetyenziswa ngokubanzi kwii-resistor ezisemgangathweni, iimoto
iinxalenye, ii-resistors ezijikelezayo, njl. kusetyenziswa i-insulation processing efanelekileyo kwezi zicelo, kusetyenziswa ngokupheleleyo iimpawu ezikhethekileyo ze-enamel coating.

Ngaphezu koko, siza kusebenzisa i-enamel coating insulation kwiingcingo zesinyithi ezixabisekileyo ezifana nesilivere kunye neplatinum xa ziodolwe. Nceda usebenzise le mveliso-ngoku-odolwa.

Uhlobo LweI-NichromeUcingo

I-NiCr80/20, i-NiCr70/30, i-NiCr60/15, i-NiCr90/10, i-NiCr35/20, i-NiCr30/20

Uhlobo lokufaka ubushushu

Igama elifakwe i-insulation enamel	Inqanaba lobushushuºC (Ixesha lokusebenza liyi-2000h)	Igama leKhowudi	Ikhowudi ye-GB	Uhlobo lwe-ANSI
Ucingo olune-enamel ye-polyurethane	130	I-UEW	QA	MW75C
Ucingo olufakwe i-polyester enamel	155	I-PEW	QZ	MW5C
Ucingo olune-enamel ye-polyester-imide	180	I-EIW	QZY	MW30C
I-polyester-imide kunye ne-polyamide-imide egqunywe kabiniucingo olune-enamel	200	I-EIWH (i-DFWF)	QZY/XY	MW35C
Ucingo olune-enamel lwe-polyamide-imide	220	I-AIW	QXY	MW81C

Uhlobo lweNtambo ye-Alloy engenanto

Iingxubevange esizenzayo ziyi-enamelled wire ye-Copper-nickel alloy, i-Constantan wire, i-Manganin wire. I-Kama Wire, i-NiCr Alloy wire, i-FeCrAl Alloy wire njl.

eyona nto iphambili ipropati uhlobo		I-Cuni1	I-CuNI2	I-CuNI6	I-CuNi8	I-CuNI10	I-CuNi14	I-CuNi19	I-CuNi23	I-CuNi30	I-CuNi34	I-CuNI44
eyona nto iphambili ikhemikhali ukwakheka	Ni	1	2	6	8	10	14.2	19	23	30	34	44
	MN	/	/	/	/	/	0.3	0.5	0.5	1.0	1.0	1.0
	CU	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla
ubuninzi ukusebenza ubushushu		/	200	220	250	250	300	300	300	350	350	400
uxinano g/cm3		8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9
ukumelana nokuxhathisa kwi-20 °c		0.03 ± 10%	0.05± 10%	0.10± 10%	0.12± 10%	0.15± 10%	0.20± 5%	0.25± 5%	0.30± 5%	0.35± 5%	0.40± 5%	0.49± 5%
ubushushu i-coefficient ye ukuxhathisa		<100	<120	<60	<57	<50	<38	<25	<16	<10	-0	<-6
ukuthamba amandla e-mpa		>210	>220	>250	>270	>290	>310	>340	>350	>400	>400	>420
ubude		>25	>25	>25	>25	>25	>25	>25	>25	>25	>25	>25
ukunyibilika inqaku °c		1085	1090	1095	1097	1100	1115	1135	1150	1170	1180	1280
i-coefficient ye ukuhanjiswa komoya		145	130	92	75	59	48	38	33	27	25	23