Wamkelekile kwiwebhusayithi zethu!
English
1
Ibhena (1)
Ibhena (3)
Ibhena (2)
I-HAI-NICr 80 Flat Wire Nichrome Alloy Flat Wire enenkxaso elungileyo yokumelana nokwenza ngokwezifiso Umfanekiso obonisiweyo
  • I-HAI-NICr 80 Flat Wire Nichrome Alloy Flat Wire enenkxaso elungileyo yokumelana nokwenza ngokwezifiso

I-HAI-NICr 80 Flat Wire Nichrome Alloy Flat Wire enenkxaso elungileyo yokumelana nokwenza ngokwezifiso

Inkcazo emfutshane:

Nika i-HAI-NICr 80 Flat Wire ekumgangatho ophezulu – i-Nichrome Alloy Flat Wire esebenza kakuhle enokumelana okuhle, ifanelekile ekufudumaleni kwimizi-mveliso, kwizixhobo zombane, nakwizicelo zobushushu ezichanekileyo. Sixhasa ukwenziwa ngokwezifiso ngokupheleleyo (ubungakanani, ubude, ukugqitywa komphezulu) ukuze kuhambelane neemfuno zakho ezithile. Le ntambo ye-HAI-NICr 80 inika ukuhanjiswa okuzinzileyo, ukusebenza okuhlala ixesha elide, kunye nokuhambelana nezifudumezi/ii-oveni.


  • Igama lemveliso:Intambo ethe tyaba ye-HAI-NICr 80
  • Izinto eziphambili:I-Nichrome
  • Inqanaba:I-HAI-NICr 80
  • I-MOQ:5kg
  • Imvelaphi:iTshayina
  • Umzi-mveliso:Ewe
  • Inzuzo:Ukumelana Okulungileyo
  • Uphawu:ITankii

    • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    Ulwazi oluSisiseko.

     

    Uphawu Iinkcukacha Uphawu Iinkcukacha
    Imodeli INOMBOLO. I-HAI-NICr 80 Ubunyulu I-Ni≥75%
    I-alloy I-Nichrome Alloy Uhlobo Ucingo oluSicaba
    Ulwakhiwo oluPhambili I-Ni ≥75%,Cr 20-23% Iimpawu Ukumelana okuhle nokungabandakanywa kwe-oxidation
    Uluhlu lwesicelo Isithinteli, iHeater Ukumelana nombane 1.09 Ohm·mm²/m
    Eyona iPhakamileyo
    Sebenzisa Ubushushu    		 1400°C Uxinano 8.4 g/cm³
    Ukwandiswa ≥20% Ukuqina 180 HV
    Ukusebenza Okukhulu
    Ubushushu    		 1200°C Iphakheji yoThutho Ibhokisi/Ityala lomthi
    Inkcazo Yenzelwe wena Uphawu lwentengiso ITankii
    Imvelaphi iTshayina Ikhowudi ye-HS 7505220000
    Umthamo weMveliso Iitoni ezili-100/ngenyanga

    Intambo yeNickel-Chromium 80/20 (Intambo yeNiCr 80/20)​

    Ucingo lwe-alloy olusebenza kakuhle (80% Ni, 20% Cr) oluyilelwe ukusetyenziswa kubushushu obuphezulu kunye nombane, lufanelekile kwiimeko ezifuna kakhulu kwimizi-mveliso nakubathengi.
    Iimpawu eziphambili​
    • Uzinzo lobushushu obuphezulu: Isebenza ngokuqhubekayo ukuya kuthi ga kwi-1,100°C (2,012°F); incopho yexesha elifutshane kwi-1,250°C (2,282°F).
    • Ukumelana ne-Oxidation: Yenza ifilimu ekhuselayo ye-Cr₂O₃ ukumelana nokugqwala xa kufudunyezwa nge-cyclic heating.
    • Ukumelana Okuzinzileyo: ~1.10 Ω·mm²/m (20°C) ukuze kubekho ubushushu obufanayo, akukho mabala ashushu.
    • Ubuchule Obulungileyo: Kulula ukwenza (ukuzoba, ukujija) ngelixa ugcina amandla kumaqondo obushushu aphezulu.
    Iingenelo eziPhambili​
    • Ubomi benkonzo ende kunciphisa iindleko zokulungisa.
    • Ukuguqulwa kobushushu okusebenzisa amandla kakuhle (kunciphisa inkunkuma).
    • Isebenziseka lula kwiifom ezenziwe ngokwezifiso (ucingo olucolekileyo, iikhoyili, iiribhoni).
    • Ixabiso eliphantsi xa kuthelekiswa nezinye iindlela zokusetyenziswa kobushushu obuphezulu ixesha elide.
    Izicelo eziqhelekileyo​
    • Imizi-mveliso: Izinto zokufudumeza ze-furnace/i-oven, izixhobo zeplastiki zokubumba.
    • Indlu: Izitovu zombane, iitoaster, izifudumezi zamanzi.
    • Iimoto: Izifudumezi zezihlalo, izinyibilikisi.
    • I-Aerospace/Medical: Ulawulo lobushushu lwe-Avionics, izixhobo zokubulala iintsholongwane.
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale