Wamkelekile kwiwebhusayithi zethu!
English
1
Ibhena (1)
Ibhena (3)
Ibhena (2)
I-FeCrAl Alloy A1 Kan-thal APM Resistance Heating Wire yeeKilns Umfanekiso obonisiweyo
  • I-FeCrAl Alloy A1 Kan-thal APM Resistance Heating Wire yeeKilns
  • I-FeCrAl Alloy A1 Kan-thal APM Resistance Heating Wire yeeKilns
  • I-FeCrAl Alloy A1 Kan-thal APM Resistance Heating Wire yeeKilns
  • I-FeCrAl Alloy A1 Kan-thal APM Resistance Heating Wire yeeKilns

I-FeCrAl Alloy A1 Kan-thal APM Resistance Heating Wire yeeKilns

Inkcazo emfutshane:

Iimveliso zentambo ezinkulu ezitsalwa ngobushushu obuphezulu ze-A1 zingasetyenziselwa isithando somlilo esinokumelana nobushushu obuphezulu. Indlela yokusebenza iye yabonisa ukuba: inkqubo yemveliso izinzile, ukusebenza okudibeneyo kulungile. Inokumelana okuhle nokuxinana kobushushu obuphezulu kunye nobomi benkonzo ende; iipropati ezintle zokujika xa kusetyenzwa ngobushushu begumbi, kulula ukubumba; ukuqina okuncinci kokubuyela umva njalo njalo. Ukusebenza kakuhle kakhulu; ubushushu bokusebenza bunokufikelela kwi-1400 ℃.
Iinkcukacha eziphambili kunye nokusetyenziswa:

Iinkcukacha zeMveliso eziqhelekileyo: 0.5 ~ 10 mm

Ukusetyenziswa: ikakhulu kusetyenziswa kwi-powder metallurgy furnace, i-diffusion furnace, i-radiant tube heater kunye nazo zonke iintlobo ze-furnace heating body ezishushu kakhulu.


  • INOMBOLO YEMODELO: A1
  • Umphezulu:Igolide / iqaqambile
  • Iphakheji yoThutho:Ityala leenkuni, iPallet yomthi
  • Inkcazo:0.5 ~ 10 mm, ISO9001, ISO14001
  • Imvelaphi:imvelaphi
  • Ukuxhathisa:1.45

    • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    IZINTO EZIPHAMBILI ZEEKHEMIKHALI KUNYE NEEPROPATHI

     

    Iipropati \ Udidi

    A1

    Cr

    Al

    Re

    Fe

    25.0

    6.0

    Ifanelekile

    Ibhalansi

    Ubushushu obuphezulu beNkonzo eQhubekayo (ºC)

    Ububanzi 1.0-3.0

    Ububanzi obukhulu kune-3.0,

    1225-1350℃

    1400℃

    Ukuqina kobushushu obuyi-20ºC (ohm*mm2/m)

    1.45

    Ubuninzi (g/cm3)

    7.1

    Iqondo lokunyibilika eliqikelelweyo (ºC)

    1500

    Ukwandiswa (%)

    16-33

    Ukugoba Ngokuphindaphindiweyo (F/R) 20℃

    7-12

    Ixesha leNkonzo eQhubekekayo 1350℃

    Engaphezulu kwe8iiyure ezi-0

    Ulwakhiwo lweMicrographic

    I-Ferrite
    Isithando somlilo Umoya Owomileyo Umoya ofumileyo i-hydrogen-argon I-Argon Ukuqhekeka
    umoya ongqongileyo igesi igesi ye-ammonia
    Ubushushu(IsiNgesi)℃） 1400 1200 1400 950 1200

     

    Incwadi yokusebenzisa

     

    1. I-Voltage elinganisiweyo: 220V/380V

     

    1. Inkqubo yokufakela ukuze baphephe ukungqongqoza, ukuze baphephe ucingo lwesitovu olufumileyo nolubanjwa ngesandla, kufuneka banxibe iiglavu. Ucingo kufuneka lufakwe emva kokuba isitovu sihlale sithe tyaba, kwaye kuthintelwe ukukrweleka komphezulu, ukungcola, ukugqwala, okanye ukufakwa okungafanelekanga, ngokuchaphazela ubomi be

     

    1. Kwi-voltage elinganisiweyo ekufuneka isetyenziswe. Kwi-atmosphere enamandla yokunciphisa, i-atmosphere ene-asidi, i-atmosphere enomswakama ophezulu iya kuchaphazela ukusetyenziswa kobomi;

     

    1. Ubushushu ngaphambi kokusetyenziswa kufuneka bube kwindawo eyomileyo nengangcolisiyo, malunga ne-1000 ℃ ichithe iiyure ezimbalwa, ukuze ifilimu yokukhusela intambo yesithando yenziwe phezu komphezulu emva kokusetyenziswa okuqhelekileyo, ukuze iqinisekise ubomi obuqhelekileyo bentambo yesithando;

     

    1. Ukufakelwa kwesithando somlilo kufuneka kuqinisekise ukuba ucingo olugqunyiweyo lunamandla aneleyo okuthintela ukuchukumisa isithando somlilo emva kocingo, ukukhusela ukutsha okanye umbane.
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale