Wamkelekile kwiiwebhusayithi zethu!

I-FeCr23Al5 / 0Cr23Al5 CrAl23/5 ucingo lokufudumeza lobushushu obuphakamileyo / ucingo oluFlethi

Inkcazelo emfutshane:


  • ibakala:CrAl23/5
  • umphezulu:Iqaqambile, iAneled, ithambile
  • Ubuninzi:7.25
  • unyango:I-Anneal, ukuqengqeleka okubandayo, umzobo obandayo
  • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    I-FeCrAl 23-5/ iTemperature yokuFundisa ngocingo / iFlat Wire

    Isetyenziswa kakhulu kwi-heater, into yokufudumala kunye ne-resistor, njl.

    NiCr 80/20, NiCr 70/30, NiCr 60/15, NiCr 35/20

    FeCrAl15-5, FeCrAl20-5,FeCrAl 25-5, njl...

    Constantan, Alloy 30, Alloy 60, Alloy 90, njl.

    Ukuxhathisa koMbane ukusuka ku-0.02 u ohm/m-1.53 ​​u ohm/m

    Ubushushu bokusebenza ukusuka kwi-200 C ukuya kwi-1400 C

    Pls khululeka ukuba uqhagamshelane nathi ukuba kukho nawuphi na umbuzo.

    NiCr:
    RESISTOHM 20, RESISTOHM 30, RESISTOHM 40, RESISTOHM 60, RESISTOHM 70, RESISTOHM 80

    FeCrAl:
    I-RESISTOHM 125, RESISTOHM 135, RESISTOHM 140,
    I-RESISTOHM 145, RESISTOHM 153

    KuNi
    Constantan, Cuprothal 5, Cuprothal 10, Cuprothal 15, Cuprothal 30, Eurica

    IBanga le-FeCrAl Alloy Ukuqulunqwa kwemichiza %
    C P S Mn Si Cr Ni Al Fe Re Abanye
    ubuninzi(≤)
    1Cr13Al4 0.12 0.025 0.025 0.7 ≤1.00 12.5-15.0 —- 3.5-4.5 0.1 UBhal.
    0Cr15Al5 0.12 0.025 0.025 0.7 ≤1.00 14.5-15.5 —- 4.5-5.3 0.1 UBhal.
    0Cr25Al5 0.06 0.025 0.025 0.7 ≤0.60 23.0-26.0 ≤0.60 4.5-6.5 0.1 UBhal.
    0Cr23Al5 0.06 0.025 0.025 0.7 ≤0.60 20.5-23.5 ≤0.60 4.2-5.3 0.1 UBhal.
    0Cr21Al6 0.06 0.025 0.025 0.7 ≤1.00 19.0-22.0 ≤0.60 5.0-7.0 0.1 UBhal.
    0Cr21Al4 0.06 0.025 0.025 0.7 ≤1.00 21.0-23.0 ≤0.60 3.0-5.2 0.1 UBhal.
    0Cr21Al6Nb 0.05 0.025 0.025 0.7 ≤0.60 21.0-23.0 ≤0.60 5.0-7.0 0.1 UBhal.
    0Cr27Al7Mo2 0.05 0.025 0.025 0.7 ≤0.40 26.5-27.8 ≤0.60 6.0-7.0 0.1 UBhal.

    Ukubunjwa kwemichiza kunye neePropati:

    Iipropati/iBanga NiCr 80/20 NiCr 70/30 NiCr 60/15 NiCr 35/20 NiCr 30/20
    Imichiza ephambili
    Ukuqamba(%)
    Ni UBhal. UBhal. 55.0-61.0 34.0-37.0 30.0-34.0
      Cr 20.0-23.0 28.0-31.0 15.0-18.0 18.0-21.0 18.0-21.0
      Fe ≤ 1.0 ≤ 1.0 UBhal. UBhal. UBhal.
    Max Ukusebenza
    Iqondo lobushushu(ºC)
    1200 1250 1150 1100 1100
    Ukuxhathisa kwi-20ºC
    (μ Ω · m)
    1.09 1.18 1.12 1.04 1.04
    Ubuninzi (g/cm3) 8.4 8.1 8.2 7.9 7.9
    I-Thermal Conductivity

    (KJ/m· h· ºC)

    60.3 45.2 45.2 43.8 43.8
    I-Coefficient ye-Thermal
    Ukwandiswa(α × 10-6/ºC)
    18 17 17 19 19
    Indawo yokunyibilika(ºC) 1400 1380 1390 1390 1390
    Ubude (%) > 20 > 20 > 20 > 20 > 20
    Ulwakhiwo lweMicrographic austenite austenite austenite austenite austenite
    iPropati yeMagnetic nonmagnetic nonmagnetic nonmagnetic nonmagnetic nonmagnetic
    IBanga leCuNi Alloys Ukumelana nombane
    (20degreeΩ
    mm²/m)
    i-coefficient yobushushu bokumelana
    (10^6/digri)
    Ukuxinana
    g/mm²
    Max. ubushushu
    (isidanga)
    Indawo yokunyibilika
    (isidanga)
    CuNi1 0.03 < 1000 8.9 200 1085
    CuNi2 0.05 <1200 8.9 200 1090
    CuNi6 0.10 < 600 8.9 220 1095
    CuNi8 0.12 < 570 8.9 250 1097
    CuNi10 0.15 < 500 8.9 250 1100
    CuNi14 0.20 < 380 8.9 300 1115
    CuNi19 0.25 <250 8.9 300 1135
    CuNi22 0.30 <160 8.9 300 1150
    CuNi30 0.35 <100 8.9 350 1170
    CuNi34 0.40 -0 8.9 350 1180
    CuNi40 0.48 ± 40 8.9 400 1280
    CuNi44 0.50 < -6 8.9 400 1280

    I-FeCr23Al5 / Cr23Al5 iCr23Al5 yoMcingo wokuFundisa ngokuPhezulu / ucingo oluFlethi


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi