I-ERNiFeCr-1 i-Welding Wire (i-UNS N08065) – i-Nickel-Iron-Chromium Alloy Filler Metal ye-Power Generation kunye ne-Nuclear Application
Ingcaciso yeMveliso
I-ERNiFeCr-1 i-nickel-iron-chromium alloy welding wire eyenzelwe ukudibanisa i-alloys yokwakheka okufanayo, njenge-Inconel® 600 kunye ne-Inconel® 690, kunye ne-welding engafaniyo phakathi kwe-nickel alloys kunye ne-stainless or low-alloy steels. Ixabiseke kakhulu ngokuxhathisa kwayo kuxinzelelo lokuqhekeka kwe-corrosion, ukudinwa kwe-thermal, kunye ne-oxidation kumaqondo obushushu aphezulu.
Ngokuqhelekileyo isetyenziselwa ukuveliswa kwamandla enyukliya, ukusetyenzwa kweekhemikhali, kunye nokwenziwa kotshintshiselwano lobushushu, olu cingo luqinisekisa ubume besakhiwo phantsi kweemeko ezinoxinzelelo oluphezulu. Ifanelekile kuzo zombini iinkqubo ze-welding ze-TIG (GTAW) kunye ne-MIG (GMAW).
Ezona mpawu
-
Ukuchasana okugqwesileyo kuukuqhekeka kwe-corrosion yoxinzelelo, i-oxidation, kunye nokudinwa kwe-thermal
-
Ukuhambelana okuphezulu kwe-metallurgical kunye ne-Inconel® 600, 690, kunye nesiseko sesinyithi esahlukileyo
-
I-arc ezinzileyo, i-spatter ephantsi, kunye nembonakalo ye-bead egudileyo kwi-TIG kunye ne-MIG welding
-
Ifanelekileiindawo ezinoxinzelelo oluphezulu lomphungakunye namacandelo esixhobo senyukliya
-
Amandla aphezulu omatshini kunye nokuzinza kwe-metallurgical kumaqondo okushisa aphakamileyo
-
Iyahambelana neI-AWS A5.14 ERNiFeCr-1kunye ne-UNS N08065
Amagama aqhelekileyo / amagama
-
I-AWS: ERNiFeCr-1
-
I-UNS: N08065
-
I-Equivalent Alloys: I-Inconel® 600/690 i-welding wire
-
Amanye Amagama: I-Nickel Iron Chromium welding filler, iAlloy 690 ucingo lokuwelda
Usetyenziso oluqhelekileyo
-
Welding Inconel® 600 kunye 690 amacandelo
-
Ityhubhu yejenereyitha yomphunga weNyukliya kunye nokwaleka kweweld
-
Iinqanawa zoxinzelelo kunye namacandelo ebhoyila
-
Iiwelds ezingafaniyo kunye neentsimbi ezingenasici kunye ne-low-alloy
-
Ityhubhu yesitshintshi sobushushu kunye nemibhobho yereactor
-
Isigqubuthelo esigqunyiweyo kwindawo ezonakalisayo
Ukwakheka kwemichiza (% Eqhelekileyo)
| Isiqalelo | Umxholo (%) |
|---|---|
| I-Nickel (Ni) | 58.0 - 63.0 |
| Intsimbi (Fe) | 13.0 - 17.0 |
| I-Chromium (Cr) | 27.0 - 31.0 |
| IManganese (Mn) | ≤ 0.50 |
| Ikhabhoni (C) | ≤ 0.05 |
| Isilicon (Si) | ≤ 0.50 |
| iAluminiyam (Al) | ≤ 0.50 |
| I-Titanium (Ti) | ≤ 0.30 |
Iipropati zoomatshini (Eziqhelekileyo)
| Ipropati | Ixabiso |
|---|---|
| Tensile strength | ≥ 690 MPa |
| Unikeze Amandla | ≥ 340 MPa |
| Elongation | ≥ 30% |
| ITemp yokuSebenza. | Ukuya kuthi ga kuma-980°C |
| I-Creep Resistance | Egqwesileyo |
Iinkcukacha ezifumanekayo
| Into | Iinkcukacha |
|---|---|
| Uluhlu lweDiameter | 1.0 mm – 4.0 mm (umgangatho: 1.2mm / 2.4mm / 3.2mm) |
| Inkqubo yeWelding | TIG (GTAW), MIG (GMAW) |
| Ukupakishwa | 5kg / 15kg spools okanye TIG iintonga ngqo |
| Imeko yoMphezulu | Isiphelo esiqaqambileyo, esicocekileyo, esingenamhlwa |
| Iinkonzo ze-OEM | Ukuleyibhile ngokwezifiso, ikhowudi yebhakhowudi, ukupakishwa ngokwezifiso kuyafumaneka |
Ii-alloys ezinxulumeneyo
-
I-ERNiFeCr-2 (Inconel 718)
-
I-ERNiCr-3 (Inconel 82)
-
I-ERNiCrMo-3 (Inconel 625)
-
I-ERNiCrCoMo-1 (Inconel 617)
-
I-ERNiCr-4 (Inconel 600)
