I-wire yokuchasana nombane uWire Popkel Cuni2 / Cuni8 / Cuni10 / Cuni14 / Cuni24 / Cuni44 / Cuni44 / Cuni44 / Cuni45 I-COCKERAN WINKIRY WINCECY WIIR
I-Copper yethu ye-Nickel Alkel Wire sisixhobo esikumgangatho ophezulu obonelela ngokuchasene nombane, ukumelana nobushushu, kunye nokunganyangeki. Kulula ukuyiqhubela kwaye kukhokelele i-welded, iyenza ilungele izicelo ezahlukeneyo kumzi-mveliso wombane.
Iqhele ukusetyenziswa kwimveliso yamacandelo aphambili kwi-thermal ngaphezulu kwe-thermal kudluliselwa, ukuxhathisa isekethe ephantsi, kunye nezixhobo zombane, i-wickel ye-neckel ye-natecy ye-Nickel. Ikwasetyenziswa ngokubanzi kwiintambo zombane zokufudumeza, zenza ukuba zibe yinto ebalulekileyo kwiinkqubo zokufudumeza.
Ezona mpawu:
- Ukunganyangeki kombane okuphantsi
- Ukuchasana nobushushu
- Ukunganyangeki
- Kulula ukuqhubela phambili kwaye kukhokelele i-welded
Izicelo:
- Abaphulaphuli besekethe ephantsi
- I-thermal
- Iintambo zokufudumeza kombane
- I-TART YOKUGQIBELA
- Ikhephu elinyibilikisi kunye ne-mats
- I-cer racmailing heating mats
- Umgangatho wokuphefumla kunye neentambo
- I-Sundze yokukhusela iintambo
- Abalandeli boMbane boMbane
- Ukufudumeza kwe-ptfe
- I-hose iyatshisa
- Ezinye iimveliso zombane eziphantsi
Khetha i-niker ye-wire ye-nickel ye-nickel ye-nickel ye-nickel yentsebenzo yayo ekhethekileyo kunye nokuthembeka. Nxibelelana nathi eShanghai Tanii Tnkii Waloy
| Phawula | Ukuxhathisa (200C μ.m) | Iqondo lobushushu max (0c) | Amandla e-thensle (MPA) | Inqaku lokunyibilika (0c) | Ukuxinana (G / CM3) | I-TCR X10-6 / 0C (20 ~ 600 0C) | I-Emf vs cu (μv / 0c) (0 ~ 100 0C) |
| I-Alloy Nomerity | |||||||
| I-NC005 (CIni2) | I-0.05 | 200 | ≥220 | I-1090 | 8.9 | <120 | -12 |
UCopper Nickel Alo-Cuni2
Umxholo weeShemicamikhali:I-CUNI2 yi-backel yoshicilelo kunye ne-shemical affir ye%.
Igama lemveliso:I-CUNI2 / CUNI8 / CUNI8 / CUNI10 / CUNI114 / CUNI19 / EMVA /I-CUNI23/ I-CUNI34 / CUNI40 / CUNI44 / CUNI45 / CUni45 / I-CUni45 / I-COPCHER POPCH ALTEY PALTY PATE TUTACOOUAN CASMOCOUAN CASMOCOMULEUkuchasana noWire
Amagama aphambili:I-Cuni44 ucingo / ucofe ucingo lwe-wire / i-wishstantan wire / i-Istantin Wires / i-Wires-wire ye-Alfackel 5 I-wire / wichrome wire wire / wickel wire / i-nickel alloy wire / i-chrothal 5
Iimpawu:[Uhlobo: I-Wire ye-Copper), [Isicelo: Imeko yomoya okanye ifriji, ityhubhu yamanzi, [i-heater yamanzi], [EZIQHELEKILEYO]
| Ni | Mn | Fe | Si | Cu | Enye | Isikhokelo se-rohs | |||
| Cd | Pb | Hg | Cr | ||||||
| 2 | - | - | - | I-bal | - | ND | ND | ND | ND |
Iipropathi zoomatshini
| I-max yenkonzo yokuqhuba | I-200ºC |
| Ukuxabasha kwi-20ºC | I-0.05 ± I-10% ye-ohm mm2 / m |
| Ukuxinana | 8.9 g / cm3 |
| Ukuqhubela phambili kwe-thermal | <120 |
| Indawo yokunyibilika | I-1090ºC |
| Amandla e-thanse, i-N / MM2 ane-anned, ithambile | I-140 ~ 310 MPA |
| Amandla e-thansile, n / mm2 abandayo | 280 ~ 620 MPA |
| I-Elongiya (Anneal) | I-25% (imiz) |
| I-Elongition (ebandayo) | I-2% (imiz) |
| Emf vs cu, μv / ºc (0 ~ 100ºC) | -12 |
| Ulwakhiwo lwe-Micrographic | i-austedite |
| Ipropathi yemagneti | Hayi |
I-Copper Nickel Alloty
| Ipropathi ephambili | I-CUNI1 | Cuni2 | Cuni6 | I-CUNI10 | I-CUNI19 | I-CUNI23 | I-CUNI30 | I-CUNI34 | I-CUNI44 | |
| Iikhemikhali eziphambili ukwakhiwa | Ni | 1 | 2 | 6 | 10 | 19 | 23 | 30 | 34 | 44 |
| MN | / | / | / | / | 0.5 | 0.5 | 1.0 | 1.0 | 1.0 | |
| CU | phumla | phumla | phumla | phumla | phumla | phumla | phumla | phumla | phumla | |
| Amaqondo obushushu asebenzayo ° c | / | 200 | I-220 | I-250 | I-300 | I-300 | I-350 | I-350 | I-400 | |
| Ukuxinana g / cm3 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | 8.9 | |
| Ukuxhathisa kwi-20 ° C | I-0.03 ± 10% | I-0.05 ± 10% | I-0,1 ± 10% | I-0.15 ± 10% | I-0.25 ± 5% | I-0.3 ± 5% | I-0.35 ± 5% | 0.40 ± 5% | 0.49 ± 5% | |
| Iqondo lokushisa i-UNORDORD lokuxhathisa | <100 | <120 | <60 | <50 | <25 | <16 | <10 | -0 | <-6 | |
| Amandla e-tunsle Mpa | > 210 | > 220 | > 250 | > 290 | > 340 | > 350 | > 400 | > 400 | > 420 | |
| i-elongwation | > 25 | > 25 | > 25 | > 25 | > 25 | > 25 | > 25 | > 25 | > 25 | |
| Indawo yokunyibilika ° C | I-1085 | I-1090 | I-1095 | I-1100 | I-1135 | I-1150 | I-1170 | I-1180 | I-1280 | |
| Ukungasebenzi | I-145 | I-130 | 92 | 59 | 38 | 33 | 27 | 25 | 23 | |
