Wamkelekile kwiwebhusayithi zethu!
English
1
Ibhena (1)
Ibhena (3)
Ibhena (2)
Izinto zokugquma zePTFE ezihlala ixesha elide kunye ne-Thermocouple Alloy Umfanekiso obonisiweyo
  • Izinto zokugquma zePTFE ezihlala ixesha elide i-N Thermocouple Alloy

Izinto zokugquma zePTFE ezihlala ixesha elide i-N Thermocouple Alloy

Inkcazo emfutshane:


  • Izixhobo:I-NiCrSi+NiSi
  • Uhlobo: N
  • Umgangatho:I-ASTM, ANSI, JIS, IEC, IEC584
  • Izinto zokuvala ubushushu:I-FEP, i-PFA, i-PVC, i-PTFE
  • Ubungakanani:Zonke Ubungakanani Ziyafumaneka
  • Ijakethi:I-FEP, i-PFA, i-PVC, i-PTFE

    • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    Iinkcukacha
    1.Isitayile:Intambo yoLwandiso
    2.I-thermocoupleucingo lobhedu
    I-thermocoupleUdidi lwentambo yobhedu
    1. Inqanaba le-thermocouple (inqanaba lobushushu obuphezulu). Olu hlobo lwentambo ye-thermocouple lufanelekile kakhulu kuhlobo lwe-thermocouple K, J, E, T, N kunye ne-L kunye nezinye izixhobo zokubona ubushushu obuphezulu, isenzi sobushushu, njl.njl.
    2. Inqanaba lentambo yokubuyisela (inqanaba lobushushu eliphantsi). Olu hlobo lwentambo ye-thermocouple lufanelekile kakhulu ekuhlawuleni intambo kunye nentambo yokwandisa ye-thermocouples ezahlukeneyo zohlobo lwe-S, R, B, K, E, J, T, N kunye ne-L, intambo yokufudumala, intambo yokulawula njalo njalo.

     

    Uhlobo lwe-thermocouple kunye ne-index

    Uhlobo lweThermocouple kunye ne-Index
    Uhlobo Uhlobo Uluhlu Lomlinganiselo(°C)
    I-NiCr-NiSi K -200-1300
    I-NiCr-CuNi E -200-900
    I-Fe-CuNi J -40-750
    I-Cu-CuNi T -200-350
    I-NiCrSi-NiSi N -200-1300
    I-NiCr-AuFe0.07 I-NiCr-AuFe0.07 -270-0

    Ubungakanani kunye nokunyamezelana kweFiberglass Insulated Thermocouple Wire
    Ubukhulu / Ukunyamezelana mm): 4.0+-0.25

     

    Ikhowudi yombala kunye nokunyamezelana kokuqala kokulinganisa ucingo lwe-thermocouple:

    Uhlobo lweThermocouple Ikhowudi yoMbala ye-ANSI Ukunyamezela koLungiso lokuqala
    Ii-Alloys zocingo Ukulinganisa +/-
    Umqhubi    		 Ijakethi Uluhlu lobushushu Umgangatho
    Imida    		 ekhethekileyo
    Imida
    Intsimbi(+) vs.
    UConstantan(-)    		 J Mhlophe/Bomvu Ntsundu 0°C ukuya ku +285°C
    285°C ukuya ku +750°C    		 ±2.2°C
    ± .75%    		 ±1.1°C
    ± .4%
    I-CHROMEL(+) vs.
    I-ALUMEL(-)    		 K Mthubi/Bomvu Ntsundu -200°C ukuya kwi -110°C
    -110°C ukuya kwi-0°C
    0°C ukuya ku +285°C
    285°C ukuya ku +1250°C    		 ± 2%
    ±2.2°C
    ±2.2°C
    ± .75%    		 ±1.1°C
    ± .4%
    Ubhedu(+) vs.
    UConstantan(-)    		 T Luhlaza/Bomvu Ntsundu -200°C ukuya kwi -65°C
    -65°C ukuya ku +130°C
    130°C ukuya ku +350°C    		 ± 1.5%
    ±1°C
    ± .75%    		 ± .8%
    ± .5°C
    ± .4%
    I-CHROMEL(+) vs.
    UConstantan(-)    		 E Mfusa/Bomvu Ntsundu -200°C ukuya kwi -170°C
    -170°C ukuya ku +250°C
    250°C ukuya ku +340°C
    340°C+900°C    		 ± 1%
    ±1.7°C
    ±1.7°C
    ± .5%    		 ±1°C
    ±1°C
    ± .4%
    ± .4%

    Ikhowudi yoMbala kunye noKunyamezela koLungiso lokuqala lweNtambo yoLwandiso:

    Uhlobo lolwandiso Ikhowudi yoMbala ye-ANSI Ukunyamezela koLungiso lokuqala
    Ii-Alloys zocingo Ukulinganisa +/-
    Umqhubi    		 Ijakethi Uluhlu lobushushu Umgangatho
    Imida    		 ekhethekileyo
    Imida
    Intsimbi (+) vs. uConstantan(-) JX Mhlophe/Bomvu Mnyama 0°C ukuya ku +200°C ±2.2°C ±1.1°C
    I-CHROMEL (+) vs. I-ALUMEL (-) KX Mthubi/Bomvu Lubhelu 0°C ukuya ku +200°C ±2.2°C ±1.1°C
    Ubhedu(+) vs. uConstantan(-) TX Luhlaza/Bomvu Luhlaza -60°C ukuya ku-+100°C ±1.1°C ± .5°C
    I-CHROMEL(+) vs. uConstantan(-) EX Mfusa/Bomvu Mfusa 0°C ukuya ku +200°C ±1.7°C ±1.1°C

    Iipropati Zomzimba zePVC-PVC:

    Iimpawu Ukuvala ubushushu Ijakethi
    Ukumelana nokurhawuzelelwa Kulungile Kulungile
    Nciphisa Ukumelana Kulungile Kulungile
    Ukumelana nokufuma Igqwesile Igqwesile
    Ukumelana ne-Solder Iron Imbi Imbi
    Ubushushu beNkonzo 105ºC iyaqhubeka
    I-150ºC enye    		 105ºC iyaqhubeka
    I-150ºC enye
    Uvavanyo lweLanga Ukuzicima ngokwakho Ukuzicima ngokwakho

    Iprofayile yekhampani

    I-Huona (Shanghai) New Material Co., Ltd. Yasekwa ngo-2008, okwangoku ineenkampani ezintathu
    ulwahlulo: iCandelo leMagnesium, iCandelo leSpray yoBushushu kunye neCandelo leZinto eziSebenzayo.
    ICandelo leMagnesium livelisa iimveliso zesinyithi seMagnesium. Iimodeli ezahlukeneyo ezikumgangatho ophezulu
    ipleyiti ye-magnesium alloy, iintonga ze-magnesium, i-magnesium ecocekileyo kakhulu, ipleyiti ye-magnesium,
    i-magnesium die casting, iiprofayili ze-magnesium extrusion kunye nezinye i-magnesium zesinyithi kunye ne-deep
    iimveliso zokucubungula.
    ICandelo leentambo zokutshiza ezishushu libonelela ngeentlobo ngeentlobo zeentambo zesinyithi ezicocekileyo kunye ne-alloy zesinyithi, kuquka
    iingcingo ezisekelwe kwi-nickel, i-iron, i-aluminium, kunye ne-zinc kwiiprojekthi zokutshiza ngobushushu.
    Icandelo lezinto ezisebenzayo libonelela ngezixhobo zokupakisha ze-elektroniki (i-GTMS, i-CTMS), ezithambileyo
    ii-alloys zemagnethi kunye ne-bimetal strip.
    Inkampani yethu iqinisekiswe yinkqubo yomgangatho we-ISO9001 kunye nokhuseleko lokusingqongileyo lwe-ISO14001.
    inkqubo.

     

     

     

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale