Ukuveliswa kweNtambo ye-China CuNi2 Cuprothal 5 Copper Nickel Alloy kunye neFektri

Umfanekiso obonisiweyo weCuNi2 Cuprothal 5 Copper Nickel Alloy Wire

I-CuNi2 Cuprothal 5 Copper Nickel Alloy Wire

Inkcazo emfutshane:

I-Copper Nickel Alloy yenziwe kakhulu nge-copper kunye ne-nickel. I-copper kunye ne-nickel zinokunyibilikiswa kunye nokuba ipesenti engakanani na. Ngokwesiqhelo i-resistivity ye-CuNi alloy iya kuba phezulu ukuba umxholo we-Nickel mkhulu kunomxholo we-Copper. Ukusuka kwi-CuNi1 ukuya kwi-CuNi44, i-resistivity isuka kwi-0.03μΩm ukuya kwi-0.49μΩm. Oko kuya kunceda umenzi we-resistor ukuba akhethe ucingo lwe-alloy olufanelekileyo.

Ukuxhathisa:0.03-0.49μΩm

Ububanzi:0.05-5.0mm

Izixhobo:I-alloy ye-CU-NI

Imilo:Ucingo olujikelezayo lokumelana

Umphezulu:Qazileyo

Ukupakisha:I-Spool+ Ibhokisi+ Ityala leplanga

Ikhowudi ye-HS:7408290000

Imvelaphi:iTshayina

Isampuli:I-odolo encinci yamkelwe

Uxinano:8.9g/cm3

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

Isicelo:
Isixhobo sokwaphula isekethe esinombane ophantsi, i-thermal overload relay, intambo yokufudumeza yombane, ii-electrical heating mats, intambo yokunyibilikisa ikhephu kunye nee-mats, ii-ceiling radiant heating mats, ii-floor heating mats kunye nee-Cables, ii-freeze protection cables, ii-electrical heat tracers, ii-PTFE heating cables, ii-hose heaters, kunye nezinye iimveliso zombane ezinombane ophantsi

Uphawu	Ukumelana (200C μΩ.m)	Ubushushu obuphezulu bokusebenza (0C)	Amandla okuThamba (i-Mpa)	Iqondo lokunyibilika (0C)	Ubuninzi (g/cm3)	I-TCR x10-6/ 0C (20~600 0C)	EMF vs Cu (μV/ 0C) (0~100 0C)
Amagama e-alloy
NC005(CuNi2)	0.05	200	≥220	1090	8.9	<120	-12

I-Copper Nickel Alloy- CuNi2
Umxholo weeKhemikhali, %

Ni	Mn	Fe	Si	Cu	Okunye	Isikhokelo seROHS
						Cd	Pb	Hg	Cr
2	-	-	-	I-Bal	-	ND	ND	ND	ND

Iipropati zoomatshini

Ubushushu beNkonzo eQhubekayo obuphezulu	200ºC
Ukuqina kwakhona kwi-20ºC	0.05±10%ohm mm2/m
Uxinano	8.9 g/cm3
Ukuqhuba kweThermal	<120
Indawo yokunyibilika	1090ºC
Amandla okuThamba, i-N/mm2 eqhotyoshelweyo, ethambileyo	140~310 Mpa
Amandla okuThamba, i-N/mm2 Cold Rolled	280~620 Mpa
Ukwandiswa (i-anneal)	25% (umzuzu)
Ukwandiswa (okuqengqelekayo okubandayo)	2% (umzuzu)
I-EMF vs i-Cu, μV/ºC (0~100ºC)	-12
Ulwakhiwo lweMicrographic	i-austenite
Ipropati yeMagnetic	Hayi