China CuNi10 Low Resistance Alloy Wire Manufacture and Factory

CuNi10 Low Resistance Alloy Wire

Inkcazelo emfutshane:

I-Copper Nickel Alloy yenziwe ikakhulu ngobhedu kunye ne-nickel. Ubhedu kunye ne-nickel inokunyibilika kunye kungakhathaliseki ukuba yiyiphi ipesenti. Ngokuqhelekileyo ukuxhathisa kwe-CuNi alloy kuya kuba phezulu ukuba umxholo we-Nickel mkhulu kunomxholo weCopper. Ukusuka kwi-CuNi1 ukuya kwi-CuNi44, ukuxhathisa kuvela kwi-0.03μΩm ukuya kwi-0.49μΩm. Oko kuya kunceda ukuveliswa kwe-resistor ukukhetha olona cingo lufanelekileyo lwe-alloy.

Ukuxhathisa:0.15+/-5%μΩm

Umphezulu:Eqaqambileyo

tpye:ucingo olujikelezayo lokuxhathisa

Izinto:Ingxubevange yeNickel yobhedu

Isampulu:Iodolo encinci yamkelwe

idayamitha:0.05-5.0mm

igama:CUNI intambo yokumelana nombane

umgangatho:GB/ASTM

Ikhowudi ye-HS:7408290000

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

CuNi10
IiNickel zobhedu (i-Copper-Nickel), i-Copper-Nickel, (90-10). Ukumelana nokugqwesa okugqwesileyo, ngakumbi kwiindawo ezihlala elwandle.

Amandla aphezulu ngokuphakathi, ukuxhathisa okulungileyo kokunyuka kumaqondo obushushu aphakamileyo. Iipropati ngokubanzi zonyuka kunye nomxholo we-nickel.

Ixabiso eliphezulu xa lithelekiswa nobhedu-aluminiyam kunye nezinye iialloyi ezinempahla yomatshini efanayo

Uphawu	Ukuxhathisa ( 200C μ Ω . m)	Max. Ubushushu bokusebenza ( 0C)	Amandla Okuqina (Mpa)	Indawo yokunyibilika (0C)	Ubuninzi ( g/cm3)	TCR x10-6/ 0C (20~600 0C)	EMF vs Cu (μ V/ 0C) (0~100 0C)
I-alloy Nomenclature
NC035(CuNi30)	0.35± 5%	300	350	1150	8.9	<16	-34

IiPropati zoomatshini	Metric	Amagqabantshintshi
Amandla okuqina, okugqibelele	372 – 517 MPa
Amandla okuqina, Ukuvunwa	88.0 - 483 MPa	Kuxhomekeke kumsindo
Ukwandiswa ngexesha lekhefu	45.0 %	kwi 381 mm.
Imodyuli yeElasticity	150 GPA
Poissons Umlinganiselo	0.320	Kubaliwe
Charpy Impact	107 J
Ubuchule	20%	I-UNS C36000 (ubhedu olusikwa simahla) = 100%
Shear Modulus	57.0 GPA