I-China copper wire thermal class C / 200*C ANSI TYPE MW35C okanye i-IEC 317-13. I-polyester-imide kunye ne-polyamide-imide ene-enamel ephindwe kabini eyenziwe nge-winding wire Umenzi kunye noMzi-mveliso

intambo yobhedu yeklasi C / 200*C Uhlobo lwe-ANSI MW35C okanye i-IEC 317-13. Intambo ejijekileyo ene-enamel ephindwe kabini ene-polyamide. Umfanekiso obonisiweyo

intambo yobhedu yeklasi C / 200*C Uhlobo lwe-ANSI MW35C okanye i-IEC 317-13. Intambo yokujika ephindwe kabini ene-enamel egqunywe yi-polyamide kunye ne-polyamide

Inkcazo emfutshane:

Isatifikethi:I-ISO 9001

Ubungakanani:Yenzelwe wena

Izibuko:IShanghai, eTshayina

uphawu:ITankii

izixhobo zomqhubi:ucingo lokumelana ne-alloy

isicelo:I-Fence Mesh, I-Horizontal Mesh, I-Resistor, I-Heater

uhlobo:Ifakwe i-enamel

umbala:njengoko kufuneka

I-MOQ:30 kg

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

ucingo lobhedu iklasi yobushushu C/ 200*C ANSI TYPE MW35C okanye IEC 317-13. I-Polyester-imide kunyei-polyamide-imideUcingo oluphindwe kabini olune-enamel olufakwe kabini

Ingcaciso yeMveliso
Ezi ntambo zokumelana ezine-enamel zisetyenziswa ngokubanzi kwii-resistor ezisemgangathweni, iimoto
iindawo, izithinteli zokujikeleza, njl. kusetyenziswaubushushu bomzimbaukucubungula kulungele kakhulu ezi zicelo, kusetyenziswa ngokupheleleyo iimpawu ezikhethekileyo zokwambathisa i-enamel.

Ngaphezu koko, siza kucoca i-enamel.ubushushu bomzimbaucingo lwesinyithi oluxabisekileyo olufana nolwesilivere nolweplatinum xa luodolwa. Nceda usebenzise olu hlobo lokuvelisa xa luodolwa.

Uhlobo lweNtambo yeNichrome
I-NiCr80/20, i-NiCr70/30, i-NiCr60/15, i-NiCr90/10, i-NiCr35/20, i-NiCr30/20

Uhlobo lokufaka ubushushu

Igama elifakwe i-insulation enamel	Inqanaba lobushushuºC (Ixesha lokusebenza liyi-2000h)	Igama leKhowudi	Ikhowudi ye-GB	Uhlobo lwe-ANSI
Ucingo olune-enamel ye-polyurethane	130	I-UEW	QA	MW75C
Ucingo olufakwe i-polyester enamel	155	I-PEW	QZ	MW5C
Ucingo olune-enamel ye-polyester-imide	180	I-EIW	QZY	MW30C
Ucingo olune-enamel olufakwe i-polyester-imide kunye ne-polyamide-imide olufakwe kabini	200	I-EIWH (i-DFWF)	QZY/XY	MW35C
Ucingo olune-enamel lwe-polyamide-imide	220	I-AIW	QXY	MW81C

Uhlobo lweNtambo ye-Alloy engenanto
Iingxubevange esizenzayo ziyi-enamelled wire ye-Copper-nickel alloy, i-Constantan wire, i-Manganin wire. I-Kama Wire, i-NiCr Alloy wire, i-FeCrAl Alloy wire njl.

eyona nto iphambili ipropati uhlobo		I-Cuni1	I-CuNI2	I-CuNI6	I-CuNi8	I-CuNI10	I-CuNi14	I-CuNi19	I-CuNi23	I-CuNi30	I-CuNi34	I-CuNI44
eyona nto iphambili ikhemikhali ukwakheka	Ni	1	2	6	8	10	14.2	19	23	30	34	44
	MN	/	/	/	/	/	0.3	0.5	0.5	1.0	1.0	1.0
	CU	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla	ukuphumla
ubuninzi ukusebenza ubushushu		/	200	220	250	250	300	300	300	350	350	400
uxinano g/cm3		8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9	8.9
ukumelana nokuxhathisa kwi-20 °c		0.03 ± 10%	0.05± 10%	0.10± 10%	0.12± 10%	0.15± 10%	0.20± 5%	0.25± 5%	0.30± 5%	0.35± 5%	0.40± 5%	0.49± 5%
ubushushu i-coefficient ye ukuxhathisa		<100	<120	<60	<57	<50	<38	<25	<16	<10	-0	<-6
ukuthamba amandla e-mpa		>210	>220	>250	>270	>290	>310	>340	>350	>400	>400	>420
ubude		>25	>25	>25	>25	>25	>25	>25	>25	>25	>25	>25
ukunyibilika inqaku °c		1085	1090	1095	1097	1100	1115	1135	1150	1170	1180	1280
i-coefficient ye ukuhanjiswa komoya		145	130	92	75	59	48	38	33	27	25	23

ucingo lokufudumeza lwe-nicr8020 alloy

1. Malunga nentambo yeNichrome
I-alloy ye-Nichrome iquka i-nickel ecocekileyo, i-alloy ye-NiCr, i-alloy ye-Fe-Cr-Al kunye ne-alloy ye-nickel yobhedu.
Ii-alloy ze-chrome ze-nickel: i-Ni80Cr20, i-Ni70Cr30, i-Ni60Cr15, i-Ni35Cr20, i-Ni30Cr20, i-Cr25Ni20, i-nickel ecocekileyo i-Ni200 kunye ne-Ni201

2.Inzuzo ephambili kunye nesicelo

1. I-alloy ye-nickel-chromium, i-nickel-chromium enokumelana okuphezulu nokuzinzileyo, ukumelana nokugqwala, ukumelana nokuxinana komphezulu kulungile, ingcono xa iphantsi kobushushu obuphezulu kunye namandla enyikima, i-ductility elungileyo, ukusebenza kakuhle kunye nokudityaniswa.

Iimveliso zethu zisebenza kakhulu kushishino lweekhemikhali, indlela yokwenza isinyithi, ishishini leglasi, ishishini le-ceramic, indawo yezixhobo zasekhaya njalo njalo.

3. Ulwakhiwo lweekhemikhali:

Uphawu	Ukwakheka kweekhemikhali				Si	Cr	Ni	Al	Fe
	C	P	S	Mn
	Akukho ngaphezu
I-Cr20Ni80	0.08	0.020	0.015	0.60	0.75-1.60	20.0-23.0	hlala	≤0.50	≤1.0
Cr15Ni60	0.08	0.020	0.015	0.60	0.75-1.60	15.0-18.0	55.0-61.0	≤0.50	hlala
I-Cr20Ni35	0.08	0.020	0.015	1.00	1.00-3.00	18.0-21.0	34.0-37.0	-	hlala
I-Cr20Ni30	0.08	0.020	0.015	1.00	1.00-2.00	18.0-21.0	30.0-34.0	-	hlala

Xa imveliso ikwimeko ethi “M”, kufuneka ilandelwe yi-GB/T1234-1995 esemgangathweni.
Ukuxhathisa:

Uphawu	I-Cr20Ni80		I-Cr20Ni60		I-Cr20Ni35	I-Cr20Ni30
Ububanzi mm	<0.50	0.50-3.0	<0.50	≥0.50	<0.50	≥0.50
ukumelana (20°C)uΩ·m	1.09±0.05	1.13±0.05	1.12±0.05	1.15±0.05	1.04±0.05	1.06±0.05

intambo yobhedu yeklasi C / 200*C Uhlobo lwe-ANSI MW35C okanye i-IEC 317-13. Intambo yokujika ephindwe kabini ene-enamel egqunywe yi-polyamide kunye ne-polyamide