Wamkelekile kwiiwebhusayithi zethu!

I-Copper Nickel Alkel Strictric Strictan Tape / Cuni40 Cuni44 Strip Strip

Inkcazo emfutshane:

I-Copper Nickel Alkel Strictric Strictan Tape / Cuni40 Cuni44 Strip Strip
Ingcaciso

Ukumelana ne-Alloy ye-Alloy ngokuxhaphalana okulinganiselweyo kunye nobushushu obuphantsi i-chiefficess yokunganyangeki / i-curve ye-curve egudileyo ngaphezulu kwe "manganins". I-Cuni44 Ucingo lwe-Cuni lubonisa ukumelana nokuxhaphaza okungcono kunendoda iGanans. Ukusetyenziswa kuthathelwe umda kwisekethe. I-CUNI44 / CUNI40 / CIni45 i-Constan Copcper Nickel Alkel Wire ikwayinto engalunganga yohlobo lwe-thermocouple ene-iron ukuba i-iron ibe yinto entle ngentsimbi. Chwetheza i-thermocouples ezisetyenziswa kubushushu bokunyanga izicelo. Kwakhona, yeyona nto imbi yohlobo lwe-thermocouple ye-OHCC yobhedu Chwetheza ii-thermocouples ezisetyenziswa kwiqondo lobushushu baseStunogenic.


  • Isatifikethi:ISO 9001
  • Ubungakanani:Yenziwe ngokwezifiso
  • Ukuxhathisa:0.49
  • Ukuxinana:8.9
  • Amandla amathandathu:I-420
  • I-Elongition: 25
  • Umphezulu:iqaqambile
  • Ububanzi:I-0.05-0.1
  • Ububanzi:0.5-400
  • Ukucaciswa:0.05-5
  • Ubume:I-strip / wire / ribbon / umbhobho / iphepha / i-bar / foil
  • Iphakheji yothutho:Ibhokisi yebhokisi yebhokisi / icala lomthi
  • Iinkcukacha zemveliso

    FAQ

    Iimpawu zeMveliso

    Umxholo weShemikhali (%)I-CUNI44

    Ni Mn Fe Si Cu Enye Isikhokelo se-rohs
    Cd Pb Hg Cr
    44 I-1.50% 0.5 - I-bal - ND ND ND ND

    Iipropathi zoomatshiniI-CUNI44

    I-max yenkonzo yokuqhuba I-400 ºc
    Ukuxhathisa kwi-20ºC I-0.49 ± 5% ohm * mm2 / m
    Ukuxinana 8.9 g / cm3
    Iqondo lokushisa i-UNORDORD lokuxhathisa <-6 × 10-6 / ºc
    Emf vs cu (0 ~ 100ºC) -43 μv / ºc
    Indawo yokunyibilika I-1280 ºc
    Tensile strength Min 420 MPA
    I-elongwation Min 25%
    Ulwakhiwo lwe-Micrographic I-austedite
    Ipropathi yemagneti Hayi.

    Iimpawu zemveliso:

    1) Ukulwa kakuhle kwe-oxidation kunye noomatshini kubushushu obuphezulu;

    2) Ukuyenzeka okuphezulu kunye nobushushu obuphantsi ubulungisa bokuxhathisa;

    3) ukuphinda kwenziwe ngokutsha kunye nokusebenza;

    I-4) I-weldeng ye-welding egqwesileyo

     









  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo apha kwaye uthumele kuthi