China 1.2mm 1.6mm 2.4mm Alimunium Alloy En Aw-4043 Er4043 AA4043 Welding Wire/Rods Manufacture and Factory

1.2mm 1.6mm 2.4mm Alimunium Alloy En Aw-4043 Er4043 AA4043 Welding Wire/Iintonga Umfanekiso ofakiweyo

1.2mm 1.6mm 2.4mm iAlimunium Alloy En Aw-4043 Er4043 AA4043 Welding Wire/Rods

Inkcazelo emfutshane:

I-ER4043 lucingo lwe-aluminiyam ye-welding ene-silicon eyongeziweyo, eyaziwa ngokuba yi-fluidity egqwesileyo kunye nokumelana nokuqhekeka. Ngokuqhelekileyo isetyenziselwa ukudibanisa i-alloys ye-aluminium efana ne-3003 kunye ne-6061. I-ER4043 ifanelekile kwizicelo ze-welding apho amandla aphezulu angeyona imfuneko ephambili, njengamacandelo eemoto, iifreyimu zebhayisikili, kunye ne-aluminium jikelele.

INOMBOLO yoMfanekiso.ER4043

Ukuqulunqwa kwemichiza:Aluminiyam

Elongation:35%

Ikhowudi yeHS:8311300000

Ubude Ondisiweyo:10-20mm

Inkcazo:1.00mm, 1.20mm, 1.60mm, 2.40mm, 3.17mm

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

I-ER4043 yocingo lwe-welding ibonelela ngeenzuzo ezininzi kwizicelo ze-welding, kubandakanywa:

1. Ulwelo olulungileyo:Ucingo lwe-ER4043 lunolwelo olulungileyo ngexesha lenkqubo ye-welding, evumela ukwakheka kwe-weld egudileyo kwaye engaguquguqukiyo.
2. Indawo eNyibilikayo ePhantsi:Olu cingo lwe-welding lunendawo yokunyibilika ephantsi ngokwentelekiso, luyenza ilungele ukuwelda izinto ezibhityileyo ngaphandle kokubangela ukugqwethwa kobushushu obugqithisileyo.
3. Ukumelana nokuMhlwa:Ucingo lwe-ER4043 lubonelela ngokuxhathisa ukudleka okulungileyo, lusenza ukuba lufaneleke kwizicelo ze-welding apho iijoyinti ezidityanisiweyo kufuneka zimelane nemekobume enomhlwa.
4. Ukuguquguquka:Iingcingo ze-ER4043 zisebenza ngeendlela ezininzi kwaye zingasetyenziselwa ukuwelda iialloyi ezahlukeneyo ze-aluminiyam, kuquka i-6xxx series alloys, edla ngokusetyenziswa kwi-structural applications.
5. IsiPlatter esincinci:Xa isetyenziswe ngokuchanekileyo, ucingo lwe-ER4043 luvelisa i-spatter encinci ngexesha le-welding, okukhokelela kwi-welds ecocekileyo kunye nokunciphisa imfuno yokucoca emva kwe-weld.
6. Amandla alungileyo:Iiwelds ezenziwe ngocingo lwe-ER4043 zibonisa iimpawu zokomelela okulungileyo, zizenza zilungele uluhlu olubanzi lwezicelo.

Umgangatho: AWS A5.10 ER4043	Ukuqulunqwa kwemichiza %
	Si	Fe	Cu		Mn	Zn	Okunye				AL
IBanga ER4043	4.5 - 6.0	≤ 0.80	≤ 0.30		≤ 0.05	≤ 0.10	-				Phumla
Uhlobo	I-Spool (MIG)					Umbhobho (TIG)
Iinkcukacha (MM)	0.8,0.9,1.0,1.2,1.6,2.0					1.6,2.0,2.4,3.2,4.0,5.0
Iphakheji	S100/0.5kg S200/2kg S270,S300/6kg-7kg S360/20kg					5kg / ibhokisi 10kg / ibhokisi ubude :1000MM
Iipropati zoomatshini	Fusion Ubushushu ºC		Umbane IACS	Ukuxinana g/mm3		Ukuqina Mpa		Yima kancinci Mpa		Ukwandisa %
	575 - 630		42%	2.68		130 - 160		70 - 120		10 - 18
	Ububanzi(MM)		1.2			1.6			2.0
MIG Ukuwelda	IWelding yangoku – A		180 - 300			200 - 400			240 - 450
	Welding Voltage- V		18 - 26			20 - 28			22 - 32
TIG Ukuwelda	Ububanzi (MM)		1.6 - 2.4			2.4 - 4.0			4.0 - 5.0
	IWelding yangoku – A		150 - 250			200 - 320			220 - 400
Isicelo	Kucetyiswa ukuwelda 6061 ,6XXX series;3XXXand2XXX series aluminiyam ialloy.
Qaphela	1, Imveliso inokugcinwa iminyaka emibini phantsi kwemeko yokupakishwa kwefektri kwaye itywinwe, kunye ne ukupakisha kunokususwa kwiinyanga ezintathu phantsi kwendawo eqhelekileyo ye-atmospheric. 2, Iimveliso kufuneka zigcinwe kwindawo engena umoya, eyomileyo kunye nendawo. 3, Emva kokuba ucingo lususiwe kwipakethe, kucetyiswa ukuba isigqubuthelo esifanelekileyo sobungqina bothuli ifakwe phezu kocingo.

Uthotho lwe welding yealmunium:

Into	AWS		I-Aluminiyam ingxubevange yeMichiza yeNdibaniselwano (%)
Into	AWS		Cu	Si	Fe	Mn	Mg	Cr	Zn	Ti	AL
IAluminiyam ecocekileyo	ER1100		0.05-0.20	1.00		0.05			0.10		99.5
	ER1100		0.05-0.20	1.00		0.05			0.10		99.5	Iplastiki efanelekileyo, yokukhusela igesi ekhuselayo okanye i-argon arc welding ye-aluminiyam esulungekileyo ekwazi ukumelana nomhlwa.
	Ingxubevange yeAluminiyam	ER5183		0.10	0.40	0.40	0.50-1.0	4.30-5.20	0.05-0.25	0.25	0.15	Rem
Amandla aphezulu, ukuchasana kakuhle kokubola, kwi-argon arc welding.
ER5356			0.10	0.25	0.40	0.05-0.20	4.50-5.50	0.05-0.20	0.10	0.06-0.20	Rem
Amandla aphezulu, ukuchasana kakuhle kokubola, kwi-argon arc welding.
ER5087			0.05	0.25	0.40	0.70-1.10	4.50-5.20	0.05-0.25	0.25	0.15	Rem
Ukumelana ne-corrosion efanelekileyo, ukuwelda kunye neplastiki, kwi-welding yokukhusela igesi okanye i-argon arc welding.
ER4047			0.30	11.0-13.0	0.80	0.15	0.10		0.20		Rem
Ikakhulu ibrazing kunye ne-soldering.
ER4043			0.30	4.50-6.00	0.80	0.05	0.05		0.10	0.20	Rem
Ukumelana ne-corrosion efanelekileyo, ukusetyenziswa okubanzi, ukhuseleko lwegesi okanye i-argon acr welding.