I-China 1.1mm ye-Alnetic Altic Felic Feni50 wire ye-chys ovelwayo kunye nomzi-mveliso

I-1.1mm ye-Alnetic Altic Felic Feni50 wire ye-chys

I-1.1mm ye-allotic altic fened Feni50 wire ye-chuks

Inkcazo emfutshane:

Nge-1J50, i-NI5 yelizwe zungua50, i-50, E11a, i-50h, i-DHI, i-DETM 2.4478, i-ALTM 753-2 alloy 2
I-alloy inyibilika kwi-vacuum ephakathi, iphoswe kwii-vots, emva kokutsala i-funks eshushu eyenziwe ngentsimbi yeshithi, emva koko itshintshe, ukuhambisa umphezulu, ukuqengqeleka kwemveliso egqityiweyo.
I-1J50 i-iron-ickel alloy (malunga ne-50% ye-NCECEL kunye ne-48% Umxholo we-Iron) yizabelo ze-magnetic ethambileyo kunye nokungeniswa okuphezulu kwemagnetic

Imodeli Hayi .:I-FEI50

Imeko:Iqaqambile

Ukuxhathisa:I-0.45

I-Agnetostricturety ye-Coudeodrication λθ / 10-6: 25

Ukuxinana (G / CM3):8.2

I-curie proT TC / ºc:I-500

Imvelaphi:China

Thumela i-imeyile kuthi

Iinkcukacha zemveliso

FAQ

Iimpawu zeMveliso

I-1.1mm ye-maynetic alloy1J50Ucingo lwe-chuks

Igama lento	I-1.1mm ye-Alnetic Alfatic 1J50ire ye-chys
Umqhubi wesifundo	1J50
Into	I-50w11b
Imeko	Iqaqambile, ithambile
Ubukhulu	1.1mm
Ukuxinana	8.25G / CM3
Ubude	I-1052m / kg
Ubunzima	malunga ne-20kg / coil
Iphakheji	ityala lomthi
Umgangatho	GB / T 15018-1194

Kwi-1J50, i-line nelinye ilizweI-Ni50, Aloy 50,E11a, 50h, Hy-ra49, PB, ASTM F30, Din 2.4478, I-ASTM 753-2 Alo Allow 2
I-alloy inyibilika kwi-vacuum ephakathi, iphoswe kwii-vots, emva kokutsala i-funks eshushu eyenziwe ngentsimbi yeshithi, emva koko itshintshe, ukuhambisa umphezulu, ukuqengqeleka kwemveliso egqityiweyo.
1J50I-Iron-Nickel Allow (malunga ne-50% i-iNCEL kunye ne-48% yomxholo we-Iron) ye-alfal ye-magnetic ye-magnetic ene-magnetic ye-magnetic yokungcola kunye nokungeniswa okuphezulu kwe-magnetic

1J50 Isicelo:
Isetyenziswa ikakhulu kwiinguqu ezahlukeneyo, zidluliselwa, i-elektromagnetic, izihlangu ze-hilenes, izihlangu ze-pole, ezidluliselwa kwi-valneting yesekethe, i-Gyroscope, i-Gyroscope, i-ECHINECHIC.

Ukuqulunqwa kwamachiza%

C	Mn	Si	P	S	Ni	Cu	Fe
≤0.03	I-0.3-0.6	I-0.15-0.3	≤0.02	≤0.02	49.0-51.0	≤0.2	I-bal.

Iipropathi zoomatshini phantsi kwemeko yalo (20ºC)

Amandla e-thensle (MPA)	I-Elongition (%)	Ubunzima (hv)
≥530	≥35	≤155

Iipropathi zomzimba

Ukuxinana (G / CM3)	8.25
Inqaku lokunyibilika (ºc)	1395-1425
Ukunganyangeki kombane kwi-20ºC	I-0.45
I-Waturety λθ / 10-6	25
I-cieie proT TC / ºc	I-500

I-COORONAR YOKUQHUTYWA
Ibanga	I-20-100ºC	20-200ºc	20-300ºC	20-400ºc	I-20-500ºC	I-20-600ºC
1J50	8.9	9.27	9.2	9.2	9.4

Iipropathi zemagneti ze-alloys ngokungqinelana okuphezulu kumabala obuthathaka
1J50	Ukwenziwa kokuqala	Ukuqaqamba okuphezulu			Cority	Ubungakanani be-magnetic yokufumana ubunzulu
СIphepha le-Driff-Rill eliqengqelekayo. Ubukhulu, mm	μ_I-0.08/ (MH / m)		μ_m/ (MH / m)	Hc / (a / m)			B_S/ T
	≥			≤
I-0.05 mm	2.5		35	20			1.5
I-0.1 ~ 0.19 mm	3.8		43.8	12
I-0.2 ~ 0.34 mm	4.4		56.3	10.4
I-0.35 ~ 1.0 mm	5.0		65	8.8
1.1 ~ 2.5 mm	3.8		44.0	12
Ibha
I-8-100 mm	3.1		25.0	24

Ifom kunye nobungakanani:

I-Colled Riling Rings	(0.03 ~ 0.10) MM X (180 ~ 250) mm > (0.10 ~ 1.00) mm x (10 ~ 250) mm > (1.00 ~ 2.50) mm x x (100 ~ 250) mm
Ucingo	Φ0.10 ~ φ6.00mm
Iribhoni	(4.50 ~ 20.0) mm x x (50 ~ 250) mm
Ibha / i-rod	Φ20.0 ~ φ100.0mm