I-China FeCrAl alloy 0cr23al5 Resistance Heating Flat Wire eneSatifikethi se-ISO9001 Umenzi kunye noMzi-mveliso

I-FeCrAl alloy 0cr23al5 Resistance Heating Flat Wire eneSatifikethi se-ISO9001

Inkcazo emfutshane:

I-0cr23al5 Resistance Heating Flat Wire eneSatifikethi se-ISO9001

Intambo yokumelana eyenziwe ngeeNickel Chrome Alloys, iiNickel Chrome Iron Alloys, iiIron Chrome Alloys zeAluminiyam, iiCopper Nickel Alloys.

Isetyenziswa kakhulu kwi-heater, i-heating element kunye ne-resistor, njl.

I-NiCr 80/20, i-NiCr 70/30, i-NiCr 60/15, i-NiCr 35/20

I-FeCrAl15-5, i-FeCrAl20-5, i-FeCrAl 25-5, njl.njl....

IConstantan, iAlloy 30, iAlloy 60, iAlloy 90, njl.

Ukumelana nombane ukusuka kwi-0.02 u ohm/m-1.53 u ohm/m

Ubushushu bokusebenza ukusuka kwi-200 C ukuya kwi-1400 C

Isatifikethi:I-ISO 9001

Ubungakanani:Yenzelwe wena

Uhlobo lweMveliso:Ucingo

Umxholo weKhabhoni:Ikhabhoni ephantsi

Ubungakanani:0.01-10mm

Isampuli:I-oda encinci yamkelwe

Igama lemveliso :0cr23al5

izinto:ingxubevange

ukusetyenziswa:imboni

umsebenzi:uzinzo oluhle

inzuzo:umgangatho ophezulu

I-MOQ:20kg

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

FAQ

Iithegi zeMveliso

I-0cr23al5 Resistance Heating Flat Wire eneSatifikethi se-ISO9001

Intambo yokumelana eyenziwe ngeeNickel Chrome Alloys, iiNickel Chrome Iron Alloys, iiIron Chrome Alloys zeAluminiyam, iiCopper Nickel Alloys.

Isetyenziswa kakhulu kwi-heater, i-heating element kunye ne-resistor, njl.

I-NiCr 80/20, i-NiCr 70/30, i-NiCr 60/15, i-NiCr 35/20

I-FeCrAl15-5, i-FeCrAl20-5, i-FeCrAl 25-5, njl. njl.…

IConstantan, iAlloy 30, iAlloy 60, iAlloy 90, njl.

Ukumelana nombane ukusuka kwi-0.02 u ohm/m-1.53 u ohm/m

Ubushushu bokusebenza ukusuka kwi-200 C ukuya kwi-1400 C

Nceda ukhululeke ukunxibelelana nathi ukuba unemibuzo.

I-NiCr:
I-RESISTOHM 20, I-RESISTOHM 30, I-RESISTOHM 40, I-RESISTOHM 60, I-RESISTOHM 70, I-RESISTOHM 80

I-FeCrAl:
I-RESISTOHM 125, I-RESISTOHM 135, I-RESISTOHM 140,
I-RESISTOHM 145, I-RESISTOHM 153

I-CuNi
UConstantan, iCuprothal 5, iCuprothal 10, iCuprothal 15, iCuprothal 30, iEurica

Ibanga le-FeCrAl Alloy	Ukwakheka kweekhemikhali %
C	P	S	Mn	Si	Cr	Ni	Al	Fe	Re	Ezinye
ubuninzi(≤)
1Cr13Al4	0.12	0.025	0.025	0.7	≤1.00	12.5-15.0	—-	3.5-4.5	0.1	Ibhala.
0Cr15Al5	0.12	0.025	0.025	0.7	≤1.00	14.5-15.5	—-	4.5-5.3	0.1	Ibhala.
0Cr25Al5	0.06	0.025	0.025	0.7	≤0.60	23.0-26.0	≤0.60	4.5-6.5	0.1	Ibhala.
0Cr23Al5	0.06	0.025	0.025	0.7	≤0.60	20.5-23.5	≤0.60	4.2-5.3	0.1	Ibhala.
0Cr21Al6	0.06	0.025	0.025	0.7	≤1.00	19.0-22.0	≤0.60	5.0-7.0	0.1	Ibhala.
0Cr21Al4	0.06	0.025	0.025	0.7	≤1.00	21.0-23.0	≤0.60	3.0-5.2	0.1	Ibhala.
0Cr21Al6Nb	0.05	0.025	0.025	0.7	≤0.60	21.0-23.0	≤0.60	5.0-7.0	0.1	Ibhala.
0Cr27Al7Mo2	0.05	0.025	0.025	0.7	≤0.40	26.5-27.8	≤0.60	6.0-7.0	0.1	Ibhala.

Ukwakhiwa kweekhemikhali kunye neeProperties:

Iipropati/Ibanga		I-NiCr 80/20	I-NiCr 70/30	I-NiCr 60/15	I-NiCr 35/20	I-NiCr 30/20
Ikhemikhali ephambili Ulwakhiwo(%)	Ni	Ibhala.	Ibhala.	55.0-61.0	34.0-37.0	30.0-34.0
	Cr	20.0-23.0	28.0-31.0	15.0-18.0	18.0-21.0	18.0-21.0
	Fe	≤ 1.0	≤ 1.0	Ibhala.	Ibhala.	Ibhala.
Ukusebenza Okukhulu Ubushushu (ºC)		1200	1250	1150	1100	1100
Ukumelana ne-resistance kwi-20ºC (μΩ · m)		1.09	1.18	1.12	1.04	1.04
Uxinano (g/cm3)		8.4	8.1	8.2	7.9	7.9
Ukuqhuba kweThermal (KJ/m· h· ºC)		60.3	45.2	45.2	43.8	43.8
I-Coefficient ye-Thermal Ulwandiso(α × 10-6/ºC)		18	17	17	19	19
Indawo yokunyibilika (ºC)		1400	1380	1390	1390	1390
Ukwandiswa(%)		> 20	> 20	> 20	> 20	> 20
Ulwakhiwo lweMicrographic		i-austenite	i-austenite	i-austenite	i-austenite	i-austenite
Ipropati yeMagnetic		engekho magnethi	engekho magnethi	engekho magnethi	engekho magnethi	engekho magnethi

Ibanga leCuNi Alloys	Ukumelana nombane (20degreeΩ mm² /m)	umlinganiselo wobushushu bokumelana (10^6/degree)	Uxinano g/mm²	Ubushushu obuphezulu (isidanga)	Indawo yokunyibilika (isidanga)
I-CuNi1	0.03	< 1000	8.9	200	1085
I-CuNi2	0.05	< 1200	8.9	200	1090
I-CuNi6	0.10	< 600	8.9	220	1095
I-CuNi8	0.12	< 570	8.9	250	1097
I-CuNi10	0.15	< 500	8.9	250	1100
I-CuNi14	0.20	< 380	8.9	300	1115
I-CuNi19	0.25	< 250	8.9	300	1135
I-CuNi22	0.30	< 160	8.9	300	1150
I-CuNi30	0.35	< 100	8.9	350	1170
I-CuNi34	0.40	-0	8.9	350	1180
I-CuNi40	0.48	± 40	8.9	400	1280
I-CuNi44	0.50	< -6	8.9	400	1280