Wamkelekile kwiiwebhusayithi zethu!
English
1
Ibhena (1)
Ibhena (3)
Ibhena (2)
0.05*1mm iCopper Nickel yocingo oluFlethi lweCuNi1 Ubushushu obunganyangekiyo kwiCable yokuFundisa ngoMbane oFanekisiweyo
  • 0.05*1mm iCopper Nickel yocingo oluFlethi lweCuNi1 Ubushushu obunganyangekiyo kwiCable yokuFundisa ngoMbane

0.05*1mm iCopper Nickel yocingo oluFlethi lweCuNi1 Ubushushu obunganyangekiyo kwiCable yokuFundisa ngoMbane

Inkcazelo emfutshane:


  • Izinto:I-Nickel Copper
  • Nickel(Mzu): 1%
  • Ukuxhathisa:0.03
  • Ubuninzi:8.9 g/cm3
  • Ubushushu obuninzi:200℃
  • Tensile strength:210 MPA

    • Iinkcukacha zeMveliso

    FAQ

    Iithegi zeMveliso

    I-0.05 * 1mm i-nickel yobhedu ucingo olucabaCuNi1ukusuka kumzi-mveliso

     

    • CuNi Series

    I-Cuni1 luhlobo lwe-nickel alloy ye-copper, ene-resistivity ephantsi yokusetyenziswa kwiqondo lokushisa ukuya kuma-200 ℃. I-CuNi1 Copper nickel alloy nayo inokumelana nobushushu kunye ne-corrosion-resistant, kulula ukusetyenzwa kwaye ilothe idityanisiwe. Isetyenziselwa ukwenza amacandelo aphambili kwi-thermal overload relay, i-low resistant thermal circuit breaker, kunye nezixhobo zombane. Ikwayinto ebalulekileyo kwintambo yokufudumeza kombane.

     

     

    • CuNi1 Copper Nickeliitafile zokusebenza kwealloyi
    Iipropati/iMathiriyeli Ukuxhathisa Ubushushu bokusebenza obuphezulu Tensile strength Indawo yokunyibilika Ukuxinana TCR EMF vs Cu
    ( 200C μΩ.m) ( 0C ) (Mpa) ( 0C ) (g/cm3) x10-6 / 0C (μV/0C)
    (20~600 0C) (0~100 0C)
    NC003 0.03 200 210 1085 8.9 <100 -8
    (CuNi1)
    NC005 0.05 200 220 1090 8.9 <120 -12
    (CuNi2)
    NC010 0.1 220 250 1095 8.9 <60 -18
    (CuNi6)
    NC012 0.12 250 270 1097 8.9 <57 -22
    (CuNi8)
    NC015 0.15 250 290 1100 8.9 <50 -25
    (CuNi10)
    NC020 0.2 300 310 1115 8.9 <30 -28
    (CuNi14)
    NC025 0.25 300 340 1135 8.9 <25 -32
    (CuNi19)
    NC030 0.3 300 350 1150 8.9 <16 -34
    (CuNi23)
    NC035 0.35 350 400 1170 8.9 <10 -37
    (CuNi30)
    NC040 0.4 350 400 1180 8.9 0 -39
    (CuNi34)
    NC050 0.5 400 420 1200 8.9 <-6 -43
    (CuNi44)
    • CuNi1 Ifomu esinokunika yona
    Ubungakanani Uluhlu Ucingo Iribhoni Ukuhluba Intonga
    idaya 0.03-7.5mm idaya 8.0-12.0mm (0.05-0.35) * (0.5-6.0) mm (0.50-2.5) * (5-180) mm 8-50mm

     

    Tankii (Shanghai) New Material Co., Ltd.Yasekwa ngo-2008, ngoku inamacandelo amathathu: iCandelo leMagnesium, iCandelo le-Thermal Spray kunye neCandelo leMathiriyeli eSebenzayo.
    ICandelo leMagnesium livelisa iimveliso zentsimbi ye-magnesium. Iimodeli ezahlukeneyo zeplate ye-magnesium alloy ekumgangatho ophezulu, iintonga ze-magnesium, i-magnesium ecocekileyo, ipleyiti ye-magnesium,
    i-magnesium die casting, iprofayili ye-magnesium extrusion kunye nezinye i-magnesium yesinyithi kunye neemveliso ezinzulu zokusetyenzwa. I-Thermal spray wire Division inikezela ngeentlobo ezininzi zeengcingo zentsimbi kunye nentsimbi ecocekileyo, kuquka i-nickel-, intsimbi-, i-aluminiyam-, kunye neengcingo ezisekelwe kwi-zinc kwiiprojekthi ze-thermal spray. I-Fuctional Material Division ibonelela ngokupakishwa kwe-electronic COMPONENENTS(GTMS, CTMS), iialloyi ezithambileyo zikamagnetic kunye ne-bimetal strip. Inkampani yethu iqinisekiswe yi-ISO9001 inkqubo yomgangatho kunye ne-ISO14001 inkqubo yokukhusela indalo.
  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iindidi zeemveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala